Thunder Arrester- Low voltage Surge protector

Quantity	50 -
Price	4.5

Port	Shanghai
Packaging	carton

Contact Now

Product Details

Application

Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the dc networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the dc power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

Specifications

WD2H-PV Surge protector	WD2H-PV
PVDC-Specific	EN50539-11
Pole	2P	2P	3P	3P	2P（COSTOMIZED）
Electrical parameter
Classified test	Ⅱ	Ⅱ	Ⅱ	Ⅱ	Ⅱ
Uoc max（VDC	600	800	1000	1500	12/24
Uc（VDC	600	800	1000	1500	12/24
In（8 /20）μs kA）	20	20	20	20	20
Imax（8 /20）μs（kA）	40	40	40	40	40
Up（kV）	2.2	3.0	3.8	5.3	0.2/0.4

Remote Signal Contact

Remote signal contact	Maximum working voltage (V)	250VAC/30VDC	250VAC/30VDC
	Maximum working current (A ) IA ( 250 V /AC )	IA ( 250V/AC)	IA (250V /AC )
	IA ( 30V DC )	IA ( 30V/AC )	IA (30V /AC)

Installation and Dimensions

Wiring capacity(mm2)	Hard wire		4~25	4~25
	Flexible wire		4~16	4~16
Stripping length( mm )			10	10
Terminals crcwa			M5	M5
Torque (Nm)		Main circuit	3.5	3.5
		Remote signal contact	0.25	0.25
Protection class		All profile	IP 40	IP 40
		Connection port	IP 20	IP 20
Installation environment			No obvious shock and vibration
Altitude（m）			≤2000	≤2000
Working Temperature			-30℃~+70℃	-30C~+70C
Relative humidity			30%~90%	30%~90%
How to install			InstalledwithH35-7.5/DINSteelmountingrail
Size mm（W×H×L）		W	36	54
		H	90	90
		L	67.6	67.6
Weight（kg）			0.24	0.36