TEVOUP Hydra FDM 3d Printer High Precision DIY 2-in-1 3D Printers Laser Engraver

Product Details

TEVOUP Hydra FDM 3d Printer High Precision DIY 2-in-1 3D Printers & Laser Engraver

Advantages:
Excellent quality with CE/FCC Certification
Easy Operation & Assembly
Simple Maintenance
1 year Warranty

Features:

2 in 1 laser engraving cutting and printing function, special module design structure, can easily switch laser head and print head.

Using lattice glass hot bed, printing adhesion is more stable, easy to take mold; AC high power fast heating hot bed, can reach 100 degrees Celsius in 1 minute, and the temperature is constant.

305x305x400mm larger build volume, able to print, cut and cave. And equip with direct extruder, free to print with soft filaments such as TPU, PLA, ABS, etc.

Adopts TMC2209 silent driver, the printing noise is as low as 50dBA, so there is no need to worry about affecting sleep even if you print at night. The motherboard uses MKS Robin Nano V3.0 which bring better performance.

Support auto-leveling function, more accurate measurement of the inclination of the hot bed plane, to achieve better printing results for beginners. And resume printing and filament run-out detection function. Faster speed, the max print speed is 150 mm/s.


Specification:

Model: Hydra 2-in-1 3D Printer

Product Size: 56 x 60 x 62cm/22.05 x 23.62 x 24.41in

Product Weight: 16kg/35.27lb

Build volume: 305 x 305 x 400 mm/11.8 x 11.8x 15.75 in

Layer resolution: 0.05mm -0.35mm

Build speed: 30mm/s - 150mm/s

Travel speed: 250mm/s

Print surface: Removable Glass-ceramic (magnetic PEI flex plate as upgrade)

Heat bed type: AC heat bed

Number of extruders: 1

Filament diameter: 1.75mm

Supported materials: PLA, PLA FLEX, PLA WOOD, ABS, PETG, HIPS, ASA, PA, PC, TPU

Special features: Modular X-Carriage, ABL, touchscreen, synced dual-z, direct drive, silent drivers

Advanced sensors: 3dtouch, filament detection sensor, sensorless homing

Calibration: Auto bed leveling

Print technology: FFF (Fused Filament Fabrication)

Feeder type: DIRECT DRIVE DUAL DRIVE extruder + V6 HOTEND

Max Z axis resolution: 0.05mm

Nozzle type: V6 + MK8

Nozzle diameter: 0.4mm (spare nozzle: 0.4, 0.6, 0.8)

Nozzle temperature: 130°C - 240°C (More to come...)

Nozzle heat up time: <2 minutes

Build plate heat up time: 120℃ in less than 2 minutes

Operating sound: < 50dBA

Power: 110-240V

Control board: 32bit MKS Robin nano v3.0 /Germany Made TMC 2209 v2.0 UART MODE Marlin 2.0.9.1 / 3.5Inch touchsceen

Upgradability: In-house made X-carriage modular system: LASER head, open-source software, removable drivers,and more to come

Package Size: 653 x 520 x 280mm/25.7 x 20.4 x 11in

Package Weight: 17kg/37.47lb