Teledyne oxygen sensor C06689-B3 ,B-3

RANGE

BACKGROUND GAS

TELEDYNE INSTRUMENTS

SENSOR OPTIONS

Trace

Less than 1000 ppm CO2 in the background gas

311, 316, 317, 318, 3160

B-2C

3000T series

L-2C

More than 1000 ppm up to 100% CO2 in the background gas

All trace oxygen instruments

A-2C

Note: To use the A-2C or B-2C sensor in a 3000T series instrument, adapter part number B66378 is required.

Note: The L-2C sensor cannot be used in our older analog models (300 series).

Percent

Less than 1000 ppm CO2 in the background gas

311P, 320A / P / BRC, 326, 327, 328

B-1, B-3 standard; 
C-3 for high concentration of O2

More than 1000 ppm up to 100% CO2 in the background gas

A-5

A-5
oxygen sensor

C6689-A5

Intermittent or continuous monitoring of percent O2 in gas mixtures containing 0-100% CO2. 90% response is time is 45 seconds.

Has more tolerance to exposure to air than A-3. No restrictions on CO2 concentration.

B-1
oxygen sensor

C6689-B1

General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds).

Use B-3 or C-3 where longer life is required and response time is relatively unimportant. May be used to spot check flue gas.

B-2C
oxygen sensor

C6689-B2C

General purpose trace O2 analysis for use in inert gas and hydrocarbon streams. Low range limit is 0-10 ppm.

May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.

INSTA TRACE
oxygen sensor

B71875

Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Low range limit is 0-10 ppm.

Used for trace O2 analysis in inert gas and hydrocarbon streams.

B-2CXL
oxygen sensor

C6689-B2CXL

Specially qualified B-2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm.

May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.

B-3
oxygen sensor

C6689-B3

Percent O2 analysis, best compromise between long life and fast response.

May be used to spot check flue gas.

B-4C
oxygen sensor

C14613-B4C

Trace O2 cell specifically designed for the Model 317EXI.

Same performance as the B-2.

B-5
oxygen sensor

C45091-B5

Special application cell (non-standard) where long life and moderately fast response are required; B-5 has a factor of 3x the life of a B-3.

Requires 3x the amplifier gain of the B-3. Expected life is 36 months in air.