MOQ | 1 piece |
Port | Shanghai |
Techwin (China) OTDR TW3100E For automatically measurement
Our website:www.techwin-china.com
We provide similiar products like Yokogawa,Anritsu,EXFO,JDSU, Ideal Networks,and we have advantage in price.
Automatic Measurement Mode: Only by selecting the measurement wavelength, the
measurement parameters are automatically set, and the trace data is automatically saved and
automatically analyzed.
Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be
automatically switched into the multi-wavelength measurement mode. Under this mode, the
analysis can be achieved on the attenuation state of the same fiber section under different
wavelengths.
Trace Fixing Function: It can achieve the same-screen comparison and display of one trace
with another real-time trace or the trace under the average measurement, which is very useful
for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber
network already been installed.
Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis
functions of any trace file.
FTTx online testing, able to identify the splitter and the fiber’s end.
Large-capacity lithium-ion rechargeable battery, with the long standby time over 8 hours.
Bellcore file format (.sor), with the storage of greater than 10,000 traces.
Communication Light Detection: It can effectively protect the test instrumentation and
communication equipments.
Connection State Detection: To promptly know the connection status of the instrumentation
and the fiber for test.
The Switching of Measurement Mode: Through the shortcut key operation, it can achieve the
flexible switching of real-time measurement mode and average measurement mode.
To achieve easily the function of bulk amendment and batch printing.
Able to generate different forms of test reports according to user needs.
To provide various flexible printing modes: The single-page single-trace printing mode, the
batch printing mode, the single-page multi-trace printing mode, the printing mode of multi-
waveform display. To provide the personalized selection of printing options and page setup.
The Function of Waveform Difference Comparison: It can open several waveforms in the
Techwin (China) Industry Co., Ltd
www.fsm-otdr.com
same window, making more easily the comparison of parameter change caused by fiber aging or other reasons.
Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.
2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 180km/20480ns/3min.
3. Measuring conditions of blind zone: reflection event is within 4Km, reflection strength < -35dB. Measured by the minimum pulse width.
4. Dynamic range measured when there is filter.
8th Floor Unit A,Block 2,No.206 Zhenhua Road,Hangzhou,China