*Rebars
Standards: ASTM, BS, DIN, AFNOR
Diameter: 6 to 40 mm
Length: 6 to 12 meters Straight and Once Folded
Wire Rods
Standards: ASTM, BS, DIN, AFNOR
Diameter: 5,5 to 25 mm
Equal Angles
Standards: DIN, EN, ASTM
Size: 20x20x3 to 200x200x24 mm
Length: Maximum 12 meters
Flat Bars
Standard: DIN, EN, ASTM
Size: 10×3 to 200×20 mm
Lengths: Maximum 12 meters
Square Bar
Standards: DIN, EN, ASTM
Size: 6 x 6 to 80 x 80 mm
Lengths: Maximum 12 meters
Round Bar
Standards: DIN, EN, ASTM
Size: 8 to 120 mm
Lengths: Maximum 12 meters
T Bar
Standards: DIN, EN, ASTM
Size: T20X3 to T140X15 mm
Lengths: Maximum 12 meters
UPN
Standards: DIN, EN, ASTM
Size: UPN40 to UPN400
Length: Maximum 12 meters
UAC
Standards: DIN, EN, ASTM
Size: UAC 30 to UAC 70
Length: Maximum 12 meters
PFC
Standards: DIN, EN, ASTM
Size: PFC 75X40X6 to PFC 00X100X46
Length: Maximum 12 meters
IPN/IPE
Standards: DIN, EN, ASTM
Size: UPN40 to UPN400
Length: Maximum 12 meters
HEA/HEB
Standards: DIN, EN, ASTM
Size: HEA 100 / HEA 100 up to HEA 500 / HEB 500
Length: Maximum 15 meters
Annealed Wire
Diameter: 0,80 to 7,00 mm
Coil Weight: 10 kg up to 1.000 kg
Galvanized Wire
Diameter: 0,80 to 10,00 mm
Zinc Coating: 30-380 g/m²Coil
Weight: 100 – 1.200 kg
Hollow Sections
Standards: EN 10219, EN 10210, ASTM A 500, AS/NZS 1163
Size: 10X10X 0,70 mm to 250X250X10 mm
Length: Maximum 12 meters
Hot Rolled Coils / Sheets
Grades: DD11, DD12, DD13, S235JR, S275JR, S355JR/JO/J2, SAE 1006-SAE 1008 – SAE 1010, S275M-S460M, S315MC – S700 MC, 28Mn6, 20,MnB5, 30MnB5
Thickness: 1,2 mm to 25 mm
Width: 900 to 2.000 mm
Cold Rolled Coils / Sheets
Grades: DC01 – DC06, DC01EK – DC04EK, H260LA – H420LA
Thickness: 0,25 to 3,00 mm
Width: 600 to 1.550 mm
Galvanized Coils / Sheets
Grades: DX51D+Z – DX57D+Z, S220 GD+Z – S550GD+Z
Thickness: 0,25 to 4,00
Width: 400 to 1.550 mm
Zinc Coating: 50-600 gr/m2
Prepainted Coils/Sheets
Thickness: 0,25 to 1,2 mm
Width: 800 to 1.500 mm
Tin Plate Coils/Sheets
Thickness: 0,16 mm up to 0,60 mm-Single Reduced
0,12 mm up to 0,30 mm – Double Reduced
Width: 700 mm up to 1.250 mm
Coating: 1,1 to 11,2 g/m2
Eye Drop/Chequred Plates
Thickness: 1,4 mm up to 16 mm
Width: 800 mm up to 1.500 mm
Length: 2.000 mm up to 12.000 mm
Welded Reinforcement Concrete Mesh
Wide range of diameters (from 3 mm to 5 mm).
Economy in terms of reinforcement due to the high strength of the cold drawn wire.
Saves time and money.
Strong welded joints.
Uniformity in the spacing between wires.
Possibility of equivalence with traditional reinforcement.
EXPANDED METAL MESH
Expanded metal mesh is a type of sheet metal
that has been cut and stretched to form a regular pattern of mesh-like
material. It is commonly used for fences, grates, and as metallic lath to
support plaster or stucco.
CONTATCT US FOR TDS AND CATALOGUE
El-Thagr complex – bld. 2, aprt.105, El-Nozha airport road next to talaat ,Mustafa hospital , 21515 , Alexandria, Egypt.