MOQ | 5 kg |
Port | any port |
Packaging | iron barrel or HDPE box |
Lead Time | 5-7 days |
process | gas atomization |
Compared with traditional technology, the MIM technology has the characteristics of high precision, uniform structure, excellent performance and low production cost. In recent years, with the rapid development of MIM technology, its products have been widely used in consumer electronics, communications and information engineering, biomedical equipment, automobile, watch industry, weapons, aerospace industry, etc.
Procuct Profile
Alloy | Norminal Composition | Remark | |||||||||
C | Si | Cr | Ni | Mn | Mo | Cu | W | V | Fe | ||
316L | ≤0.03 | ≤1.00 | 16.0~18.0 | 10.0~14.0 | ≤2.00 | 2.0~3.0 | - | - | Bal. | ||
304L | ≤0.03 | ≤1.00 | 18.0~20.0 | 8.0~12.0 | ≤2.00 | - | - | - | - | Bal. | |
17-4PH | ≤0.07 | ≤1.00 | 15.0-17.5 | 3.0~5.0 | ≤1.00 | - | 3.00~5.00 | - | - | Bal. | Nb:0.15~0.45 |
HK30 | 0.25~0.35 | ≤1.50 | 24.0~26.0 | 19.0~22.0 | ≤2.00 | ≤0.5 | - | - | - | Bal. | |
4340 | 0.38~0.43 | 0.15~0.35 | 0.7~0.9 | 1.65~2.00 | 0.6~0.8 | 0.2~0.3 | - | - | - | Bal. | |
430 | ≤0.12 | ≤0.75 | 16.0~18.0 | - | ≤1.00 | - | - | - | - | Bal. | |
440C | 0.95~1.25 | ≤1.00 | 16.0~18.0 | - | ≤1.00 | - | - | - | - | Bal. | |
440CN | 0.95~1.25 | ≤1.00 | 16.0~18.0 | - | ≤1.00 | - | ≤0.5 | - | - | Bal. | Nb:1.5~2.5 |
420J1 | 0.16~0.25 | ≤1.00 | 12.0-14.0 | ≤0.6 | ≤1.00 | - | - | - | - | Bal. | |
420J2 | 0.30~0.40 | ≤1.00 | 12.0-14.0 | ≤0.6 | ≤1.00 | - | - | - | - | Bal. | |
S136 | 0.20~0.45 | 0.8~1.0 | 12.0-14.0 | - | ≤1.00 | - | - | - | 0.15~0.40 | Bal. | |
D2 | 1.40~1.60 | ≤0.4 | 11.0~13.0 | - | ≤0.6 | 0.8~1.2 | - | - | 0.2~0.5 | Bal. | |
H11 | 0.32-0.45 | 0.6-1 | 4.7-5.2 | - | 0.2-0.5 | 0.8-1.2 | - | - | 0.2-0.6 | Bal. | |
H13 | 0.32-0.45 | 0.8-1.2 | 4.75-5.5 | - | 0.2-0.5 | 1.1-1.5 | - | - | 0.8-1.2 | Bal. | |
M2 | 0.78-0.88 | 0.2-0.45 | 3.75-4.5 | - | 0.15-0.4 | 4.5-5.5 | - | 5.5-6.75 | 1.75-2.2 | Bal. | |
M4 | 1.25~1.40 | 0.2-0.45 | 3.75-4.5 | - | 0.15-0.4 | 4.5-5.5 | - | 5.25~6.5 | 3.75~4.5 | Bal. | |
T15 | 1.4-1.6 | 0.15-0.4 | 3.75-5 | - | 0.15-0.4 | - | - | 11.75-13 | 4.5-5.25 | Bal. | Co:4.75~5.25 |
4605 | 0.4-0.6 | ≤1.00 | - | 1.5-2.5 | - | 0.2-0.5 | - | - | - | Bal. | |
8620 | 0.18-0.23 | 0.15-0.35 | 0.4-0.6 | 0.4-0.7 | 0.7-0.9 | 0.15-0.25 | - | - | - | Bal. |
Available Spec.
Particle Size |
TappingDensity (g/cm³) |
Particle Size Distribution(μm) | ||
D10 | D50 | D90 | ||
D50:13um | >4.8 | 4.0- 5.0 | 12.5-13.5 | 24-27 |
D50:12um | >4.8 | 3.5- 4.5 | 11.5-12.5 | 22-26 |
D50:11um | >4.8 | 3.0- 4.5 | 10.5-11.5 | 20-22 |
Fazhan Road, Ningxiang Economic and Technological Development Zone, Changsha,Hunan Province, PRC