Quantity | 1 - 100 |
Price | 20000 |
MOQ | 1 SET |
Port | Shenzhen |
Packaging | Poly-wooden Case |
Lead Time | 60 days |
Colour | Blue |
Stainless Steel & Steel handrail tube roll forming machine for making triangle tube, mushroom tube, bread tube shapes etc special rail pipe.
Handrail Roll forming machine operation guide
1. Develop safe operating procedures. Do not touch the mold during the operation of the unit. If you need to touch it during work, your hands should be placed in the direction of the pipe. Operators should have fixed positions, not change at will, and keep a record of shifts.
2. Before driving, check whether the lubrication points of the steel square tube forming machine are filled with corresponding lubricants. Pay special attention to the high-speed lubricating grease that is relatively high-temperature resistant to the main shaft of the flying saw. Fill it once every two days, two or three times each time. It should not be added too much. If the heat dissipation is not good, it will cause excessive heating.
Metal handrail forming equipment photo
Handrail forming machine technology (Steel tube thickness less than 3.5mm)
Model | T-75 |
Motor power | 7.5KW |
Reducer | 350 type |
Feed material | iron pipe |
Feeding round tube diameter | 1.5 inch (cun) |
Forming Roller | 8 forming + 2 straightening |
Working speed | 10 meters / minute |
Roller material | GCr15 heat treatment after finishing |
Spindle material | 40Cr after quenching and tempering |
Transmission mode | 1.2 inch chain sprocket drive |
No.85 Ainan Road, Longdong community, Longgang area, Shenchen China