We are into the business of manufacturing, exporting and
supplying excellent grade
Spring Hanger (50 mm) with 50 mm standard
deflection. Our Spring Hanger is used for isolation of
vibration produced by suspended mechanical equipment, low
speed suspended fan, transformers, ductwork, piping, etc.
Spring Hanger that we offer is especially recommended for
isolating any suspended source of audible or inaudible
noise and vibration with minimum static deflection
requirement exceeding 25 mm and up to 50 mm. Moreover,
bulk quantities of our Spring Hanger can be obtained at
very affordable rates from us.
Conforms To
-
Designed to BS 1726 1: 1987.
-
Tolerance to BS 1726 1: 2002.
-
SAE and Ashrae Guidelines for vibration Isolation
Features
-
Spring Diameter to height ratios are designed to ensure
that spring will never buckle even when fully loaded.
-
Suspension rod misalignment (30 degree arc) is
compensated in hanger design
-
Locking rubber bush centralizes the spring and prevents
dislocation.
-
Springs are powder coated with appropriate color coding
to facilitate identification.
-
Frame is made of G.I. Steel and powder coated to 100
microns paint thickness (exceeds 1000 hours of salt
spray test) and conforming to ASTM B-117.
-
Isolation brackets are capable of overloading upto
500%.
Option
-
Frame Hot dip Galvanized. Part Number Prefix with
"HDG".
-
Spring Neoprene Coated. Part Number prefix with "N".
-
Spring Plastic Dip coated. Part Number prefix with "P".
-
Spring Hangers of higher capacity and Deflection shall
be Engineered as per Specific Requirements.
Nomenclature for special Engineered spring hangers
shall be SSH (XXX-Deflection G (XXXXX-Load)
selection / Ordering
-
Point load (Calculated to include all variables such as
weight of water in pipe lines etc if applicable).
Installation Guide Lines