Spray Adhesive for matress and sofa

Product Details

Product Description

Spray Adhesive is formulated with good-quality raw materials and conforms to national compulsory standard, which possesses such features as low VOC, fresh smell, high solid content, good flexibility, easy application, strong adhesive force, environment-friendly etc.

Features and benefits

Environmental: benzene free, no hazardous materials and additives and low VOC.

Best bonding effect can be achieved even under temperature around 60°C.

Fast drying speed and long viscosity-keeping time.

Strong bonding strength and good initial bonding power; water-proof and ageing resistant.

Easy application. It is easy to apply the adhesive evenly on the bonding surface and no adhesive legging occurs.

Application for use

1,Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.

2, Pour adhesive on the two bonding surface separeately and spread it with brush or scraper. To achieve the best bonding performance, the application should be done toward the same direction and evenly.

3.the adhesive should be applied evenly and not too thick to avoid the weakening of the bonding strength. But for porous materials or materials with coarse surface, you can apply more accordingly.

4,After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness. The airing time is about 5 -8 minutes/25C and varies from the temperature, humidity and adhesive film. The bonding can be done after the surface is dry by touch. For porous materials, you can bond directly after application of the adhesive.

5,The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the bonding surfaces back and forth, or the bonding effect will be affected.

We are a reliable adhesive supplier, ensuring access to a diverse range of high-quality adhesives that meet our customers' specific bonding requirements.