Port | tianjin |
Packaging | wooden box |
Lead Time | 7 days |
Product Introduction
In order to meet the needs of the rapid development of mineral
processing, electric power, metallurgy, coal and other
industries, improve the models of slurry pumps under high head
conditions, and then summarize the experience at home and abroad
and the comprehensive information fed back by users, our company
has developed a new generation of PZX series slurry pumps with
high efficiency, large flow, high field range and multi-stage
series connection by using modern advanced technology and
scientific research achievements. The main features of this
series of products are as follows:
This series of pumps are horizontal, single stage, single suction, cantilever and double pump casing centrifugal slurry pumps.modern CAM design method is adopted, with excellent hydraulic performance, high efficiency and low wear rate. Auxiliary impeller and packing combined sealand mechanical seal are adopted to ensure no leakage of slurry.wide flow channel, good anti blocking performance and excellent cavitation performance.
Reliability design ensures that the mean time between failures (MTBF) of the whole machine is greatly improved.
Thin oil lubrication and metric bearings shall be adopted, and the lubrication and cooling system shall be reasonably set to ensure that the bearings operate at low temperature.
The flow passage parts are made of special materials with good wear and corrosion resistance.
It can be used in series in multiple stages within the allowable pressure range, and its allowable maximum working pressure is 3.6mpa.
The transmission mode of PZX series slurry pump is mainly direct connection, and the flow head of the pump is adjusted by cutting the outer diameter of the impeller.
The pump has the advantages of few specifications and models and convenient selection.
The utility model has the advantages of reasonable structure,
high efficiency, reliable operation and convenient
maintenance.
Detailed Photos
Technical Parameters
Model | Distribution power P(KW) | Flow Q(m³/h) | Head H(m) | Rotational speed n(r/min) | Efficiency η% | Cavitation allowance NPSH(m) | Impeller diameter D(mm) | Weightkg) |
85PZX | 30-55 | 56-120 | 61-58 | 1480 | 47-62 | 4.5-3 | 390 | 1850 |
11-15 | 37-76 | 25-26 | 980 | 47-62 | 2.0-1.3 | 1850 | ||
100PZX | 90-132 | 100-210 | 91-87 | 1480 | 48-66 | 5.2-2.7 | 485 | 2500 |
22-37 | 68-135 | 40-38 | 980 | 48-66 | 1.2-2.3 | 2500 | ||
75-90 | 93-187 | 77-73 | 1480 | 48-66 | 4.4-2.3 | 445 | 2500 | |
18.5-30 | 61-126 | 34-32 | 980 | 48-66 | 1.9-1.0 | 2500 | ||
55-75 | 82-168 | 63-59 | 1480 | 48-66 | 3.5-1.8 | 400 | 2500 | |
15-18.5 | 55-115 | 27-26 | 980 | 48-66 | 1.5-0.8 | 2500 | ||
150PZX | 132-200 | 209-420 | 93-85 | 1480 | 57-78 | 6-2.6 | 500 | 3000 |
37-75 | 139-278 | 40-37 | 980 | 57-78 | 2.7-2.1 | 3000 | ||
90-160 | 187-378 | 78-68 | 1480 | 57-78 | 4.9-2.1 | 450 | 3000 | |
30-45 | 125-252 | 33-30 | 980 | 57-78 | 2.1-1.1 | 3000 | ||
75-110 | 168-336 | 59-55 | 1480 | 57-78 | 3.8-1.7 | 400 | 3000 | |
18.5-30 | 110-230 | 26-24 | 980 | 57-78 | 1.7-0.8 | 3000 | ||
200PZX | 185-315 | 360-720 | 92-86 | 980 | 53-78 | 3.8-2.7 | 740 | 3450 |
90-160 | 272-544 | 52-49 | 740 | 53-78 | 2.2-1.5 | 3450 | ||
160-250 | 328-656 | 80-74 | 980 | 53-78 | 3.3-2.3 | 685 | 3450 | |
75-110 | 252-505 | 46-42 | 740 | 53-78 | 1.9-1.3 | 3450 | ||
110-200 | 305-610 | 67-64 | 980 | 53-78 | 2.8-1.1 | 630 | 3450 | |
55-90 | 233-466 | 38-36 | 740 | 53-78 | 1.6-0.6 | 3450 | ||
250PZX | 355-450 | 600-1000 | 96-92 | 980 | 76-63 | 6.7-2.7 | 740 | 4000 |
160-250 | 475-870 | 55-53 | 740 | 76-63 | 3.8-1.5 | 4000 | ||
280-400 | 560-950 | 81-77 | 980 | 76-63 | 60.-2.4 | 700 | 4000 | |
132-200 | 450-839 | 48-46 | 740 | 76-63 | 3.4-1.4 | 4000 | ||
220-250 | 519-940 | 68-64 | 980 | 76-63 | 5.0-2.0 | 640 | 4000 | |
110-160 | 389-800 | 41-39 | 740 | 76-63 | 2.9-1.1 | 4000 | ||
300PZX | 500-560 | 704-1408 | 95-85 | 980 | 78-63 | 7.3-3.3 | 740 | 4500 |
185-250 | 524-1050 | 54-49 | 740 | 78-63 | 4.2-1.9 | 4500 | ||
355-450 | 648-1296 | 82-74 | 980 | 78-63 | 7.1-3.0 | 700 | 4500 | |
160-200 | 493-985 | 47-44 | 740 | 78-63 | 4.0-1.7 | 4500 | ||
250-355 | 597-1193 | 69-64 | 980 | 78-63 | 5.5-2.5 | 645 | 4500 | |
110-160 | 453-907 | 40-36 | 740 | 78-63 | 3.1-1.4 | 4500 | ||
350PZX | 450-710 | 960-1919 | 95-86 | 980 | 81-68 | 6.9-3.5 | 760 | 5500 |
200-355 | 724-1450 | 54-49 | 740 | 81-68 | 3.9-2.0 | 5500 | ||
355-560 | 888-1775 | 82-73 | 980 | 81-68 | 5.9-3.0 | 703 | 5500 | |
160-280 | 640-1341 | 42-46 | 740 | 81-68 | 3.4-1.7 | 5500 | ||
280-500 | 816-1632 | 69-62 | 980 | 81-68 | 5.0-2.5 | 646 | 5500 | |
132-220 | 616-1232 | 39-35 | 740 | 81-68 | 2.9-1.4 | 5500 |
Product Diagram
Certificates
Company Profile
At present our products involve more than a dozen series and more than 100 varleties. The main products are horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts. The compamy has a number of high-quality, high-level and experienced technical and management elites. The material can be adjusted according to the actual working conditions of customers, So as to improve the wear resistance and corrosion resistance of the pump and greatly prolong the service life of the pump. Our products are widely used in beneficiation, metallurgy coal,electric power, petroleum, chemical industry, sand excavation, urban sewage, environmental protection and other industries.
Workshop
Product Accessories
Application
Product Transportation
FAQ
1. What
products does Pansto Pump mainly
produce?
The company
mainly produces horizontal slurry
pumps,vertical
slurry pumps, rubber-lined pumps, gravel sand pumps, foam pumps,
desulfurization pumps, filter press feed pumps, dredging pumps,
sewage pumps, submersible slurry pumps and spare parts.
.
2.
Is Pansto a direct factory or a
trader?
Yes, Pansto is
a direct slurry pump manufacturer
withimport
and export license,
own casting
shop, machine shop, heat treatment equipment and assembly shop,
as well as advanced quality inspection
equipment.
3.
Can you provide OEM, ODM services?
Yes.
OEM service is
an important part of our business.
Pansto Pump
accepts OEM business as samples or drawings of various pumps and
castings.
In
addition, we also provide ODM
services.
4. How long is
your warranty period?
We offer a
one-year unconditional warranty on our products against
manufacturing defects.
5. How about
the delivery time?
Normally our
production time is within two weeks. Please confirm
before ordering.
6.
Min MQQ?
MQQ is a pump
or spare part.
Welcome to
contact us!