Product Details
Single
Shaft Shredder Hard LDPE HDPE Plastic Block Shredding
Machine
Product
Description
Plastic block shredding machine
belongs to single shaft shredder, it is
specially used to shredding hard plastic waste into
small
pieces under 20--40mm.
Suitable Shredding
Applications:
- Plastic lump and plastic block, like PP,
PE, PET, PC, ABS, Nylon,etc.
- Plastic pipes, Plastic
barrel,
Toe gum
- Film, Woven
bags,Fiber
- Electronic
Waste,Electrical
board
- Copper Cable, Aluminum
Cable
- Paper, hardboard
Working process of single shaft
shredder:
The material enters the chassis from
the hopper, the pusher box pushes the material to the rotating
knife roller under the push of the
hydraulic cylinder, the rotating movable knife and the fixed
knife crush the material, the crushed material falls through the
screen, and
then is transported by the auxiliary conveying
equipment go
to the next process or collect and
pack.
Main characteristic of single shaft
shredder:
1. Hopper:open hopper for easy feeding.
The machine is fitted with a large filling hopper and can be
loaded by conveyor belt, fork lift,
crane or wheel-loader. This funnel can be adapted to suit
individual requirements and guarantees a continuous and
economical supply
of material without any need for manual
assistance.
2. Hydraulic System: Separate
hydraulically-operated pusher pushes the material towards the
rotor automatically inside the cutting
chamber.
3. Rotor bearings : The extremely
robust pedestal bearing housings are mounted outside the machine
and separate from the cutting
chamber to prevent dust and dirt penetrating into the oversized
bearings. This ensures a longer life and minimum
maintenance.
4. Screen: The screen mounted beneath
the rotor determines the size of the required granulate . The
screen is also easily accessible by a
separate flap and can be changed
easily.
5. PLC control system, automatic
overload protection and auto reverse
switch.
6. The low rotation speed results in a
particularly quiet shredding process with low levels of dust
generation.
7. Good shaft structure design, low
noise,blades easy
changeable.
Technical
Parameters
|
Model
|
600
|
800
|
1000
|
1200
|
Motor Power
(kw)
|
22
|
37
|
55
|
75
|
Hopper Size
(mm)
|
600*1100
|
800*1100
|
1000*1300
|
1200*1400
|
Output Capacity
(kg/h)
|
300-600
|
500-700
|
600-800
|
700-1000
|
Equipment Size
(m)
|
1.85*1.4*1.8
|
2.4*1.6*2.0
|
2.7*1.8*2.2
|
2.9*2.3*2.2
|