sina ekato high shear mixer homogenizer, movable lifting homogenizer mixer for cosmetics

2014 sina ekato high shear vacuum ointment emulsifier/homogenizer for cosmetic

2014 sina ekato good quality homogenizing emulsifier mixer is hot sale . It is designed on the basis of German technology,first choice of cosmetic factory which manufacture high quality products . Its spare parts adopt international famous brand, which leads to the high quality  and operational stability of the machine. According to the response received from our customer , this design style provides great convenience to them .

Instruction:

Motor runs with full speed and drive main shaft, rotate emulsifying vane in the emulsifying groove through main shaft to make the liquid in the bucket sucked into ring groove by guide vanes at both sides through up and below end of groove, vane is rotated circularly and quickly with main shaft as center; cut and crush high frequency mightiness between emulsifying vane end blade and emulsifying frame continuously, then recur to vane high speed acentric rotating to push out, circle mixing continuous and finish homogenizing emulsifying treatment in very short time.

Applicance:

This machine is used in homogenizing disperse and latex manufacture of medium and low viscosity emulsifying liquid and suitable to most of recipe requirement. Special rotor and stator bring out strong shearing.Rubbing.strike and convection to make oil water emulsifying grain reach stable condition1-2um).

Safety operation notice:

1)Mechanical length dimension of this machine is standard length, if

required, lengthen or shorten can be manufactured accordingly.

2)The best position of mechanical length is emulsifying groove and it is

best to go into 60% of effective liquid surface.

3)When choose emulsifying machine, here is reference:

capacity.viscosity.dealing time.reaction temperature.purpose. mail to

business department of our company.

4)Aquatic bearing of emulsifying machine adopts self-lubricated bearing

and it is forbidden to start machine when liquid is lower than

aquatic bearing to avoid damage of bearing.

5)Correct parameter accords with supplied practicality and if there is

any amendment, we will not inform in other way.

Specific example: