SFP 1.25G Tx1490/Rx1310 10Km LC Transceiver

FOB Price 5 - 9999 USD / USD

MOQ	2 set
Lead Time	7days

Product Details

Optical modules are divided into gigabit single-mode single-fiber modules and gigabit dual-fiber modules. The gigabit dual-fiber module has two interfaces, one for transmitting and one for receiving. Usually the interface is an LC interface, which is connected by two jumpers; The optical fiber bidi module has only one interface, and the transceiver is integrated. The SC interface and the LC interface are mostly used, which are connected by a single-mode jumper. The gigabit single-mode single-fiber optical module needs to be used in pairs.

1.25G Tx1490/Rx1310 10Km LC Transceiver The general model is SFP-GE-LX-SM1490-BIDI, Gigabit single-mode single-fiber optical modules are widely used in Gigabit switches, Fibre Channel, routers, servers and other network equipment. The advantage of the gigabit single-fiber bidirectional optical module compared with the gigabit dual-fiber optical module is that it can save optical fibers, because the use of the dual-fiber optical module requires two optical fibers for transmission, while the single-fiber bidirectional optical module only needs one for transmission.

Get Free Quote

Compatibility of SFP 1.25G Tx1490/Rx1310 10Km LC Transceiver

Cisco

Juniper

Brocade

Extreme

HUAWEI

GLC-BX-D 1000BASE-BX10-D SMF TX:1490nm/RX:1310nm 10km SFP

GLC-BX-D20 1000BASE-BX SFP BIDI 1490nm-TX/1310nm-RX 20km

GLC-2BX-D 1000BASE-BX10-D TX:1490nm/RX:1310nm 10km CSFP

E1MG-BXU

GLC-BX-U20

JD098B

Technical Specification Of 1G SFP SX 1.25G Tx1490/Rx1310 10Km LC Transceiver

General Specifications

Parameter	Symbol	Min	Typ.	Max	Unit
Bit Rate	BR			1.25	Gb/s etc
Max.Supported Link Length	Max			10	km

Absolute Maximum Ratings

Parameter	Symbol	Min	Typ.	Max	Unit	Ref.
Storage Temperature	TS	-40		85	ºC
Storage Ambient Humidity	HA	5		95	%
Power Supply Voltage	VCC	-0.5		4	V
Signal Input Voltage		-0.3		Vcc+0.3	V
Receiver Damage Threshold		+3			dBm
Lead Soldering Temperature/Time	Told			260/10	ºC/sec	Note 1
Lead Soldering Temperature/Time	Told			360/10	ºC/sec	Note 2