Self Adhesive DOT-C2 Vehicle Contour Conspicuity Reflective Tape VHG1230

FOB Price 0.25 - 0.3 USD / usd/m

MOQ	20 rolls
Port	Shanghai
Packaging	1 ROLL/CTN
Lead Time	25-30 days

Quick Details (View All)

Size

0.05m*50m

Surface Material

Acrylic

Product Details

Product Description

YILLUMAX™ Hazard Obstacle Warning Family DOT-C2 Vehicle Delineator Conspicuity Reflective Marking Tape VHG1230 Series

Reflective Material – Vehicle Conspicuity Markings Tape
6"x6" VHG1230 consists of a smooth, flat, transparent
exterior film with retro-reflective elements embedded
beneath the film so as to form a non-exposed
retro-reflective optical system. It is a so called
non-exposed, air-cell, micro-glass bead
retro-reflective technology.



YILLUMAX™ Reflective Material – Vehicle Conspicuity
Markings 6"x6" VHG1230 series are backed with
pressure-sensitive adhesive and polyethylene coated
paper liner. If they are applied to properly prepared
surfaces, Vehicle Conspicuity Markings should provide a
long time of field performance.



Features
and Benefits

-PMMA Material

Meet With Standard: DOT FMVSS 108

Lens glass-bead embedded technology

Pressure Sensitive Adhesive

Color: Alternting 6” White Color and 6” Red
Color

Adhesive Color: Clear

1” 2”, 3” 4” Width are Available

Service Life: Outdoor durability up to 7 Years Vertical
Exposure Only

Imaging Method: Logo Imprinting is Acceptable

Application Substrates: For vehicle body conspicuity
tape, delineator reflective tape, regulate rear marking
plates on trucks, trailers, buses and articulated
trucks’ bumper & boards films requiring high
visibility, legibility and durability.

Application Temperature: at temperatures of
18°F(65°F)-30°C(86°F).

OEM Packaging



Physical
Performance

Yillumax™ Reflective Material – Vehicle Conspicuity
Markings 6”x6”
VHG1230 are certified to meet the requirements of FMVSS
108 / ASTM D4956. The following technical information
should be considered typical only and should not be
used for specification purposed.

Physical Property: Adhesion (ASTM D4956)

Test Method: 90°C Hanging Weight

FMVSS 108 Requirements: < 2 Inch (55 mm) Movement
Shrinkage (ASTM D4956)

Test Method: 9x9 Inch Panel

FMVSS 108 Requirements: < 1/8 Inch change
on

Flexibility

Test Method: Wrap around a 1/8” mandrel @ 32°F
(0°C)

FMVSS 108 Requirements: No Cracking Impact
Resistance

Test Method: 100 In-Lb, 5/8 Inch Tip

FMVSS 108 Requirements: No Damage Outside
Impact

Chemical Resistance

Test Method: (SAE J1967)

Test Result: Not Affected by toluene, #2 diesel fuel,
gasoline (Leaded) Kerosene, TSP Detergent, Xylene,
Dilute Metal Brighteners

Corrosion Resistance

Test Method: (ASTM B-117 Salt Spray)

Test Result: No Effect 1000 Hours

Minimum Application Temp. : 60°F (150°C)

High Pressure Wash

Test Method: 45° Angle, 1200 psi, 8 Inch Away

Test Result: No Peeling Off



Series

VHG1230 Vehicle Delineator Conspicuity Reflective
Marking Tape is available in the following
colors:

Reflective Performance

YillumaxTM

Vehicle Conspicuity Markings 6”x6” VHG1230 conforms to the
photometry requirements of GRADE DOT-C2 showed in the
following table when tested according to the retro
reflective sheeting photometry procedure stated in FMVSS
108 Appendix G.

Application Instructions

While use Yillumax™ Reflective Material – Vehicle
Conspicuity Markings enhances visibility, no reflective
material can guarantee absolute visibility, particularly in
adverse weather conditions. Performance will vary depending
upon actual use, exposure conditions and maintenance. Users
should test reflective material to satisfy conformance to
their own requirements.

Maintenance

Cleaning

Routine washing is recommended for maximum performance. The
following cleaning methods are recommended.

* Wash with sponge, cloth or soft brush using water and
detergent.

* Automatic truck/car wash or standard high-pressure hand
spray:

Maximum pressure-1200 PSI/ 80 bar.

Maximum water/wash solution temperature- 140°F/
60°C.

Minimum of 12 inches/ 30cm distance of cleaning jet(s) from
markings.

Cleaning wand or jets to be at no greater angle than 45
degrees from perpendicular to the marking
surface.

* When using metal brighteners, follow manufacturer’s
recommendations for dilution.

Thoroughly rinse from markings after soaking
vehicle.

Storage

* Cool, dry area out of direct sunlight.

* Temperature 65-75°F (18-24°C) humidity 30-50%.

* Store rolls horizontally, in carton or in original
packaging.