perennial agent distribution of Shanghai Baosteel, Changzhou Changbao, Heilongjiang Jianlong, Baosteel, and so on
1 Φ159 branch PQF unit
products can be manufactured in
inventory
1.1 Manufacturable product standards
serial number |
products |
Execution standards |
1 |
Tubing, casing, coupling blank |
API SPEC 5CT、Q/SHCG 18010-2016、WFGG-2020-12-11 |
2 |
Conveyor pipe |
GB/T 8163、ASTM A 106、ASTM A 333、ASME SA-333、API SPEC 5L&ASTM A 53&ASTM A 106&ASME SA-106组 Double standard, triple standard |
3 |
Structural tubes |
GB/T 8162、EN10210 |
4 |
Line pipe |
API SPEC 5L、GB/T 9711、GB/T 9711&GB/T23257、API SPEC 5L&ASTM A53/A106 |
5 |
Low and medium pressure boiler tubes |
GB/T 3087 |
6 |
High pressure boiler tubes |
GB/T 5310、GB/T 9948、GB/T 6479、ASME SA-106、ASME SA-106&ASME SA-106M、ASTM A 335、ASTM A 335&ASTM A 335M、EN 10216-1、EN 10216-2 |
7 |
Hydraulic pillar pipe |
GB/T 17396 |
8 |
Gas cylinder tubes |
GB/T 18248 |
9 |
Vehicle tubes |
agreement |
10 |
Drill pipe body material |
GB/T 9808-2008、API 5DP、协议 |
Note: 1 All products can be supplied according to a technical agreement confirmed by both the supply and demand parties. 2. Products that exceed the requirements of the above standards are subject to review by user requirements. |
1.2 Steel grades can be manufactured
serial number |
products |
Steel grade |
remark |
1 |
Tubing, casing, coupling blank |
API K55、J55、L80、N80、P110、BT110H wait |
1.9Cr, 13Cr and 15Cr and other high alloy series products need to be reviewed; 2. Couplings with a wall thickness > 20.5mm need to be reviewed. 3. The wall thickness covers 5.51-20.5mm, and the outer diameter covers 73.02-161.5mm |
2 |
Line pipe |
B~X70 PSL1和 PSL2 |
1. X70 and above corrosion resistance and offshore or user technical specifications need to be reviewed; 2. The wall thickness covers 5-25mm, and the outer diameter covers 73.02-168.3mm. |
3 |
Conveying pipe, structural tube, low and medium pressure boiler tube, high pressure boiler tube |
Both carbon steel and low alloy can be produced |
1. Products with an alloy content of more than 1% need to be reviewed. 2. For GB/T 5310 standard 20G grade, GB/T 6479 standard 20G grade, GB/T 9948 Standard 20 grade steel pipe, the wall thickness is not more than 25mm |
4 |
Gas cylinder tubes |
37Mn、37Mn/1、37Mn/2、34CrMo4 |
1. The limit wall thickness is 4mm, which cannot be met by the opening temperature of the continuous rolling mill below this wall thickness; 2. The average wall thickness is 4.5mm and below and needs to be reviewed. 3.34CrMo4 wall thickness less than 5mm, outer diameter less than 121mm need to be reviewed. |
5 |
Hydraulic pillar pipe, vehicle pipe |
27SiMn, 30CrMnSiA, etc |
All require review |
6 |
Drill pipe body material |
26CrMo47V、YX26CrMo-1、26CrMo4 |
All require review |
1.3 Available in specification and dimensional accuracy
1.3.1 Ranges of specifications are available in series
1.3.1.1 The 183 series is available in mm
4.0 |
4.2 |
4.5 |
4.8 |
5.0 |
5.5 |
6.0 |
6.5 |
7.0 |
7.5 |
8.0 |
8.5 |
9.0 |
9.2 |
9.4 |
9.5 |
10.0 |
10.5 |
11.0 |
11.4 |
12.0 |
12.7 |
13.0 |
14.0 |
15.2 |
15.5 |
16.0 |
17.0 |
18.0 |
19.0 |
20.0 |
22.0 |
25. 0 |
|
73.0 |
|||||||||||||||||||||||||||||||||
76.0 |
|||||||||||||||||||||||||||||||||
77.8 |
|||||||||||||||||||||||||||||||||
83.0 |
|||||||||||||||||||||||||||||||||
89.0 |
|||||||||||||||||||||||||||||||||
90.0 |
|||||||||||||||||||||||||||||||||
93.17 |
|||||||||||||||||||||||||||||||||
95.00 |
|||||||||||||||||||||||||||||||||
101.6 |
|||||||||||||||||||||||||||||||||
108.0 |
|||||||||||||||||||||||||||||||||
114.0 |
|||||||||||||||||||||||||||||||||
114.3 |
|||||||||||||||||||||||||||||||||
121.0 |
|||||||||||||||||||||||||||||||||
127.0 |
x |
x |
x |
||||||||||||||||||||||||||||||
133.0 |
x |
x |
x |
x |
|||||||||||||||||||||||||||||
133.35 |
x |
x |
x |
x |
|||||||||||||||||||||||||||||
139.7 |
x |
x |
x |
x |
x |
||||||||||||||||||||||||||||
140.0 |
x |
x |
x |
x |
x |
||||||||||||||||||||||||||||
141.3 |
x |
x |
x |
x |
x |
||||||||||||||||||||||||||||
146.0 |
x |
x |
x |
x |
x |
153.7 |
x |
x |
x |
x |
x |
x |
x |
x |
x |
||||||||||||||||||||||||
159.0 |
x |
x |
x |
x |
x |
x |
x |
x |
x |
||||||||||||||||||||||||
160.02 |
x |
x |
x |
x |
x |
x |
x |
x |
x |
||||||||||||||||||||||||
168.0 |
x |
x |
x |
x |
x |
x |
x |
x |
|||||||||||||||||||||||||
168.3 |
x |
x |
x |
x |
x |
x |
x |
x |
Note: 1 In the table, the red area, green area, purple area is available for specifications, orange area is available but no performance area, and white area is not available for specifications.
2. The red area is to expand the specifications, which need to consider the influence of ultra-thin-walled rolling tearing and the "inner six-square" of small outer diameter thick wall, which needs to be reviewed; The purple area is a limited size and requires review.
3. The "x" sign in the table is a single ruler, and the production economy needs to be considered.
4. The wall thickness in the table is the rolling wall thickness range, and when ordering non-nominal wall thickness, it is necessary to calculate the rolling wall thickness according to the wall thickness tolerance to confirm whether it is a available specification;
5. No specifications for orange areas and outer diameters in the table require the development of new hole patterns and need to be reviewed.
2 Φ180 branch MPM unit products can be manufactured inventory
2.1 Manufacturable product standards
serial number |
products |
Execution standards |
1 |
Casing, coupling blank |
API SPEC 5CT |
2 |
Conveyor pipe |
GB/T 8163、ASTM A 106、ASTM A 333、ASME SA-333、API SPEC 5L&ASTM A 53&ASTM A 106&ASME SA-106组合双 Standard, three standards |
3 |
Structural tubes |
GB/T 8162、EN10210 |
4 |
Line pipe |
API SPEC 5L、GB/T 9711、GB/T 9711&GB/T23257、API SPEC 5L&ASTM A53/A106 |
5 |
Low and medium pressure boiler tubes |
GB/T 3087 |
6 |
High pressure boiler tubes |
GB/T 5310、GB/T 9948、GB/T 6479、ASME SA-106、ASME SA-106&ASME SA-106M、ASTM A 335、ASTM A 335&ASTM A 335M、EN 10216-1、EN 10216-2 |
7 |
Hydraulic pillar pipe |
GB/T 17396 |
8 |
Gas cylinder tubes |
GB/T 18248 |
9 |
Vehicle tubes |
By protocol |
Note: 1. All products can be supplied according to the technical agreement confirmed by both supply and demand. 2. Products whose user requirements exceed the requirements of the above standards need to be reviewed. |
2.2 Steel grades can be manufactured
serial number |
products |
Steel grade |
remark |
1 |
Casing, coupling blank |
API,K55、J55、L80、N80、P110、BT110H wait |
1.9Cr, 13Cr and 15Cr and other high alloy series products need to be reviewed; 2. Couplings with wall thickness > 25mm and need to be quenched and tempered and heat treated need to be reviewed. |
2 |
Line pipe |
B~X70 PSL1和 PSL2 |
3. X70 and above corrosion resistance and offshore or user technical specifications need to be reviewed; 4. Line pipes with a wall thickness ≥ 25mm need to be reviewed. |
3 |
Conveying pipe, structural tube, low and medium pressure boiler tube, high pressure boiler tube |
Both carbon steel and low alloy can be produced |
3. Products with an alloy content of more than 5% need to be reviewed. 4. For GB/T 5310 standard 20G grade, GB/T 6479 standard 20G grade, GB/T 9948 Standard 20 grade steel pipes need to be normalized when the wall thickness > 25mm is supplied. |
4 |
Gas cylinder tubes |
37Mn、37Mn/1、37Mn/2、34CrMo4 |
1.Outside diameter≤180mm , the wall thickness <6mm Review required; 2.180mm< outer diameter≤219mm , wall thickness<6.0mm Review required; 3.219mm< outer diameter≤245mm , wall thickness<8.0mm Review required。 |
5 |
Hydraulic pillar pipe, vehicle pipe |
27SiMn, 30CrMnSiA, etc |
All require review |
2.3 Available in specification and dimensional accuracy
2.3.1 Ranges of specifications are available in series
2.3.1.1 The 194 Series is available in a range of specifications
MPM lines are available in a range of specifications |
||||||||||||||||||||||||||
Wall thickness Outer diameter |
5.7 |
6 |
6.4 |
6.5 |
6.7 |
7 |
7.4 |
7.6 |
8.5 |
9 |
9.5 |
10 |
11 |
12 |
13 |
14 |
16 |
18 |
20 |
22 |
24 |
26 |
28 |
30 |
32 |
34 |
139.7 |
||||||||||||||||||||||||||
140 |
||||||||||||||||||||||||||
146 |
||||||||||||||||||||||||||
152 |
||||||||||||||||||||||||||
159 |
||||||||||||||||||||||||||
168 |
||||||||||||||||||||||||||
177.8 |
||||||||||||||||||||||||||
178 |
||||||||||||||||||||||||||
180 |
|
Note: 1. The green and purple parts in the table are available specifications, and the red part is the thin-walled extended specifications; The purple part is a non-economy specification. The yellow and red parts are the specifications to be reviewed, and the yellow parts are the single-scale specifications (considering the influence of internal six-party defects on the wall thickness accuracy).
2. The wall thickness in the table is the rolled wall thickness, and when ordering non-nominal wall thickness, it is necessary to calculate the rolling wall thickness according to the wall thickness tolerance to confirm whether it is a available specification;
3. The purple part is twice the size of the non-economic specification and the outer diameter ≧ 168mm single ruler, other series should be selected
MPM lines are available in a range of specifications |
|||||||||||||||||||||||||||
Wall thickness Outer diameter |
5.6 |
5.8 |
6 |
6.2 |
6.5 |
6.7 |
7 |
7.2 |
8.0 |
8.5 |
9 |
9.5 |
10 |
11 |
12 |
13 |
14 |
16 |
18 |
20 |
22 |
24 |
26 |
28 |
30 |
32 |
34 |
168 |
|||||||||||||||||||||||||||
177.8 |
|||||||||||||||||||||||||||
178 |
|||||||||||||||||||||||||||
180 |
|||||||||||||||||||||||||||
188 |
|||||||||||||||||||||||||||
193.68 |
|||||||||||||||||||||||||||
194 |
|||||||||||||||||||||||||||
197 |
|||||||||||||||||||||||||||
200.03 |
|||||||||||||||||||||||||||
203 |
|||||||||||||||||||||||||||
215.9 |
|||||||||||||||||||||||||||
216(216.3) |
|||||||||||||||||||||||||||
219(219.1) |
|||||||||||||||||||||||||||
232 |
Note: 1 The green and purple parts in the table are available specifications, and the red part is the thin-walled extended specifications; The purple part is a non-economic specification, and the yellow part is a single-scale gauge (when the diameter-to-wall ratio is less than 10, the influence of the inner hexagonal defect trend on the wall thickness accuracy should be considered). The yellow and red parts are the specifications to be reviewed.
2. The wall thickness in the table is the rolled wall thickness, and when ordering non-nominal wall thickness, it is necessary to calculate the rolling wall thickness according to the wall thickness tolerance to confirm whether it is a specification available;
3. The purple part is not have economical specifications and single scale, and other series should be selected
4.177.8, 193.68 Specification sleeves need to be selected according to the size range, select the series
MPM lines are available in a range of specifications |
||||||||||||||||||||||||||
Wall thickness Outer diameter |
6.8 |
7 |
7.5 |
8.0 |
8.5 |
9.0 |
9.5 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
22 |
24 |
25 |
26 |
30 |
32 |
34 |
36 |
168(168.3) |
||||||||||||||||||||||||||
178(177.8) |
||||||||||||||||||||||||||
180 |
||||||||||||||||||||||||||
188 |
||||||||||||||||||||||||||
193.68 |
||||||||||||||||||||||||||
194 |
||||||||||||||||||||||||||
197 |
||||||||||||||||||||||||||
200.03 |
||||||||||||||||||||||||||
203 |
||||||||||||||||||||||||||
215.9 |
||||||||||||||||||||||||||
216(216.3) |
||||||||||||||||||||||||||
219(219.1) |
||||||||||||||||||||||||||
232 |
||||||||||||||||||||||||||
245(244.48) |
Note: 1 The green and purple parts in the table are available specifications, and the red part is the thin-walled extended specifications; The purple part is a non-economic specification, and the yellow part is a single-scale specification (when the diameter-to-wall ratio is less than 10, the influence of the inner hexagonal defect trend on the wall thickness accuracy should be considered). The yellow and red parts are the specifications to be reviewed.
2. The wall thickness in the table is the rolled wall thickness, and when ordering non-nominal wall thickness, it is necessary to calculate the rolling wall thickness according to the wall thickness tolerance to confirm whether it is available for specification;
3. The purple part is twice the size of the non-economic specification and the single size, and other series should be selected
Sima Village, Ningjin County, Xingtai City, Hebei Province