SB-100 is a cost-effective and economical atmospheric pressure sensor with high accuracy and good stability. The accuracy is 1.5% in the range of 15 ~ 115kPa. It is stable in indoor and natural conditions through multiple sensor tests, and the data drift is less than 0.5% per year. When the temperature is in the range of -20 ~ 50 ℃, the effect of temperature change on the sensor signal is less than 1%. Low power consumption and high signal, SB-100 consumes about 35mW, voltage output, output signal range is 0 ~ 5V DC, pressure measurement range is 15 ~ 115Kpa.
SB-100 atmospheric pressure sensor
SB-100 barometric pressure sensor
Technical Parameters
Measuring range
15 ~ 115kPa
Maximum withstand pressure
400kPa (Exceeding this limit may cause permanent damage to the sensor)
Sensitivity
45.9mV / kPa (approximate)
Calibration factor
0.0218kPa / mV (universal slope; inverse sensitivity) and 11.4kPa (universal intercept)
measurement accuracy
± 1.5% (universal calibration factor)
Repeatability
Less than 0.1%
Non-linear
Less than 0.1%
Preheat time
20 ms
Response time
1ms
Temperature dependence
Less than 0.002% / ℃ (greater than 0 ℃)
Less than 0.015% / ℃ (less than 0 ℃)
working environment
-40 ~ 80 ℃; 0 ~ 100% RH (non-condensing)
Input voltage
5V DC
The output voltage
0 ~ 5V DC
Current consumption
7mA DC
Dimensions
16mm diameter
weight
5g
cable
12cm bare wire
Guarantee
Material or workmanship defects, 4 years
Origin: United States