Rubber Precision performer is a high efficiency and high
precision rubber blanks preparation equipment. Application in
wide field of rubber industry can squeeze all kinds of middle
and high hardness of rubber ring, the complex three-dimensional
shape of rubber product. And the precision of rubber blank
volume is high, less gas. Suitable for production of rubber
parts, seals, valve, cork, tennis.
Rubber Precision pre-forming machine mainly compose of a
plunger extrusion equipment and a set of rubber blanks in the
machine head cutting device and, in addition with a hydraulic
system, vacuum system, heating systems, pneumatic systems, and
electrical systems. Pre-work precision machine, open the nose
or the lid , feed the preheated rubber materials through the
front barrel mount or charging inlet, and then close the head
(lid), set extrusion speed and Cutting speed (supplied volume
control chart), vacuum, cutting, accurate weight of rubber
parts can be obtained.
Introduction of rubber precision performer:
1. Extruder device: composed of hydraulic cylinders, cylinder,
head etc.
2. Hydraulic System: (Pump selection). Hydraulic machine,
sealing systems and pressure pipe joints is through the
repeated selection of more after being stereotyped, mostly
using imported parts and the joint venture enterprise products,
which fundamentally changed the previous domestic production of
oil leakage phenomenon of hydraulic equipment.
3. Pressure Display: The system displays the pressure
difference for advanced digital mode, the system pressure
regulation and control is more precise, convenient, compared
with similar products, save the addition and subtraction in
phase between the two pressure gauges to method of operation to
obtain the pressure difference, time-consuming and inaccurate.
4. Pneumatic device: used to control head switch (closed)
cylinders and other activities.
5. Electric Control System: Siemens of Germany and Japan Fuji
products, motor from ABB company, and greatly reduces the
equipment failure rate of the production process, improve
machine reliability, stability and service life.
6. Vacuum system: before extruding and cutting, using vacuum
system to remove the air and gas in barrel, head, inside the
compound mixture, thereby enhancing the quality of products
under the curing process.
7. Heating System: The water cycle heating mode, temperature
control by a digital thermostat and display. Ensure nose,
barrel temperature constant.
8. Cutting device: composed of the frame, motor, inverter
system.
9. Operating system: semi-automatic and manual operation mode
of two options, allowing users to operate in the actual use of
flexible and convenient situation.
10. Machine's structure, adopt the latest design ideas abroad,
beautiful appearance.