MOQ | 1 set |
Condition | New | CNC or Not | CNC |
Wire tension | close loop control | U,V axis travel | ±110mm |
Z axis height | Display on digital |
Accuracy
1. Bevel face roughness: Ra≤1.2μm. (Continuous cutting 20000mm² )
2. 60°taper and 50mm thickness, Accuracy error: 0.05mm.
3. Consistency≤0.008mm.(Continuous cutting 30 pcs )
4. 250mm thickness, 15° slant hole, The pore diameter error of up, middle and bottom ≤0.03mm.
4. Positioning
accuracy:0.005/100mm
5. Repetitive
Positioning: 0.003/100mm
Specification
Machine Type |
FD400 | FD500 | FD630 | FD800 |
Table size mm |
600×900 | 1010×680 | 1230×820 | 1410×1010 |
Table travel mm |
400×500 | 500×630 | 630×800 | 800×1000 |
UV axis travel mm |
±110 | ±110 | ±110 | ±110 |
Workpiece max .thickness mm |
400 | 600 | 600 | 600 |
Workpiece max.weight kg |
600 | 1400 | 2300 | 4000 |
Machine weigh KG |
1600 | 2400 | 3100 | 4000 |
Max .taper cutting |
±30°/50mm | |||
Pulse equivalent mm |
0.001 | |||
Wire speed m/s |
1-15(speed adjustment by frequency conversion) |
|||
Overall processing speed mm2/min |
60 mm2/min | |||
The fast processing speed mm2/min |
180 mm2/min | |||
The best Roughness |
1.0 μm | |||
Wire diameter |
0.1-0.20 | |||
Composite machining accuracy mm |
0.01 | |||
Drive tpye |
Stepper motor (Can grade AC servo motor) | |||
Guide |
Japanese THK linear guide |
|||
X Y axis screw |
ball screw made in China |
|||
Bearing |
Japanese NSK bearing |
|||
measurement system |
Electronic ruler |
|||
Volume of the tank L |
100 | |||
Tank size mm |
1080×620×630 | |||
Wire cylinder stroke mm |
250 |
Features
1.Wire tension drived by AC servo motor. (heavy pull is Inaccurate)
2.Tension closed-loop control by double senser and real-time display.
3.Wire guider unnecessary.
4.Wire winding and tighten by automatic.
5.Can multiple cutting of large taper and very thick products.
6.No need remove the wire when Z axis up and down.
Configuration
Pictures
No.106 Liangshuijing Road,, Daan District Zigong, Sichuan China