Product Details
Ready mixed mortars offer top quality construction with low cost.
Ready-mixed mortars solve the problem that the proportion of
mortar prepared by traditional mixing is difficult to control and
thus influences the construction quality. The measurement of
ready-mixed mortar is very accurate and the quality is
reliable.
Our ready-mixed mortar factory has been trying to develop new
products and one of them is the ready-mixed heatproof mortar.
Here are the product details.
1. Basic information
Specification and color: 20kg/bag; white powder
Compliance standard: Q/DGJC 12-2018 "Flat Roofing Mortar for
Buildings"(China National Standard)
2. Product
features
Heat insulation and waterproof, anti-cracking and anti-alkali,
fire and flame retardant, green and environmental
protection.
3.
Quantity
calculation
The theoretical quantity is about 0.5-0.75kg/m²/mm. That is,
about 0.5-0.75kg/m² when the thickness is 1 mm. The actual
quantity depends on the flatness of the base and the thickness of
the mortar layer. In general, the recommended construction
thickness is 20-40mm. That is, the theoretical quantity is about
10-30kg/m².
4.
Scope of application
It is applicable to:
---the protection and heat insulation of substrates such as
waterproof layer of buildings and cement mortar for flat
roofs.
---the protection of house waterproof layer and liquid coil
waterproof layer.
---substrates such as cement mortar, cement-based or
asphalt-based waterproof coating
It is not applicable to:
---substrates such as colored steel tiles, glazed tiles, ceramic
tiles, etc.
---sloping roofs.
5.
Product Overview
Ready-mixed heatproof mortar is a new type of inorganic material
pre-mixed and dry-mixed with selected lightweight aggregates,
inorganic cementitious materials, additives,
ect.
It has excellent thermal insulation performance, aging resistance
and fireproof performance, and is easy to use.
Just add water, stir and start the on-site construction
work.
The product is one of the components of the roof waterproof
system, which is used for thermal insulation protection of flat
roof, with good thermal insulation effect and waterproof layer
protection effect. It can also be used for the protection and
thermal insulation of other substrates such as cement mortar flat
roofs.
6.
Possible
temperature difference.
The indoor temperature difference before and after construction
could be as high as 20 degrees Celsius or 68 degrees
Fahrenheit.
7.
Construction precautions
(1) Within 24 hours after construction, the product should be
protected from rain, vibration, dust pollution and manual
trampling.;
(2) After the surface of the product is dry, it is recommended to
cover the construction layer with waterproof rain cloth for more
than 24 hours, which can effectively reduce later
cracking;
(3) It is normal for the product to have tiny cracks after being
paved and dried, which will not affect its heat insulation
effect. Please rest assured to use it;
(4) The product should be stored in a cool and dry place to avoid
direct sunlight for a long time;
(5) Please pay attention to the moisture-proof storage of
products in humid areas;
(6) After stirring , the mortar should be used up at one time,
and should not be re-used after drying;
(7) If there is rain within 24 hours, construction should be
stopped;
Disclaimer:
Please refer to the latest product packaging instructions or
product manual for product details and usage.