Product Details
Description:
TESTECH flame spread tester is design according to ISO5658-2
standard D and production, while meeting the IMO FTP Code
Resolution A. 653 (16) and ASTM E 1317 requirements. Lateral
flame propagation properties for the determination of building
products, flame propagation performance / flame spread rate of
speed can evaluate the fire retardant properties of the
material.
The device via a gas radiant plate to heat samples and with heat
flow meter to calibration; Test samples were placed in a vertical
position, near the radiation plate, exposed in a clear area
calibrated radiation flux. Close to the pilot flame test sample,
but not in contact with the test sample, the sample was heated
end ignited gas on the surface of the evaporator.
After ignition, recording the development of the flame front, and
record the flame front in a horizontal direction to reach the
surface of the sample, combustion distance of each calibration
elapsed time. Further testing materials include light heat,
sustained combustion heat, critical flow, the average sustained
burn calories, the total heat release and other relevant
parameters.
Model:FTech-ISO5658
Standards
• ISO 5658-2: reaction to fire test - Flame spread Part 2:
Vertical distribution of building products side flame spread
level.
• IMO FTP Code Resolution A. 653 (16): bulkhead, ceiling and deck
material flammability test procedures Advice
• ASTM E 1317: Marine Surface Finishes Standard Test Method for
Flammability
Main Features
• The cabinet is made of stainless steel, corrosion-resistant and
beautiful and easy to clean; The main frame have two separate
parts of the burner frame and the specimen support framework. Two
parts connected by bolts, and screws can be flexible mechanical
adjustment.
• Ignition sources: radiation plate and the United States imports
a propane torch. Precise control of the flame height
• Burner, (200 ± 10) mm long holes ceramic tube,
• Cylinder type pilot burner flame support IMO standard automatic
impact test; Optional
• Double grid and an enlarged perspective mirror observe the
flame spread , it is user-friendly
• Radiation plate temperature controller: prevent flames turned
the heat radiating plate rear side;
• Flow controller can easily test content of methane in the test
gas flame heat
• Gas supply: with a valve, zero-pressure valve, tempering
valves, solenoid valves and a mixer, the mixed air and fuel gas
supplied to the radiation plate.
• Providing a porous alignment plate and heat flow meter fixed on
a sliding movement rail to detect heat flux if meet the standard
requirements
• Equipped with an adjustable observation angle lens (750mm ×
120mm), the test sample can rake through the glass mirror and
observe the flame spread rate and by a foot switch, automatic
record.
• Sample chimney equipped with compensating thermocouples.
• All radiant panel combustion control system safety
explosion-proof, check valve, cut off the gas solenoid valve
prevents the gas reflux
• The camera can observe a situation and save the test program
(Optional)
• Measuring heat flow state within the range of the radiation
plate for 50mm
• Data acquisition system can store the image length flame spread
and combustion characteristics
• 19 "rack to measure the flame spread rate analysis, critical
flow, heat release rate
• Radiation plate burner system is fully automated, with spark
ignition and safety protect system;
• IMO program so that all calibration, test results print (IMO,
ISO) easier (Optional)