Product Details
Products:
Heat release quantity is the core parameters to evalate the fire
behavior of materials and products.TESTech's Cone Calorimeter can
meet all existing standards (including ISO 5660, ASTM E 1354,
ASTM E 1474, ASTM E 1740, ASTM F 1550, ASTM D 6113,NFPA 264,CAN
ULC 135 and BS 476 Part 15).This equipment includes these systems
such as heat release, mass loss, smoke generation, etc,and allow
users to buy the parts they need one by one and add into the same
chamber.This flexible feature is one of it's advantages.
Cone Calorimeter test theory is based on the principle that the
burn calories is proportional to the amount of oxygen's
consumption,1KG oxygen consumption will produce 13.1 MJ heat.
Test gas heat emission, ignition timing, oxygen consumption rate,
CO/CO2 generation rate, the gas flow will be measured all. Cone
Calorimeter DAQ system can help users to easily control the
entire test. 19 "touch screen can help realizing the automatic
testing and reducing installation space. In addition, users can
also change the sample temperature, or adjust the temperature
rise time to test,after setting up the virtual temperature at
real fire conditions. This method can obtain the similar test
results to real fire environment.
Model:FTech-ISO 5660A
Standards:
• ISO 5660: Reaction to fire tests - the rate of heat release,
smoke generation rate and mass loss rate.
• ASTM E 1354: Standard Test Method of materials heat and visible
smoke release rate.
• BS 476 Pt.15: Building materials and structures test: - Test
method for heat release rate of products.
• NFPA 264
1,Structural features
1.1,19-inch standard cabinet of integrated design, elegant, and
easy to operate.
1.2,Conical Heater of 230V, 5000W, the heat output of 0 ~ 120 kW
/ m2.
1.3,19-inch touch-screen computer controlling the entire testing
process.
1.4,Automatic ignition system,and automatic burning time
calculation.
1.5,3 pieces K-thermocouples and 3 PID temperature controllers
for temperature regulation.
1.6,Split gate -To protect samples area before the test, and
insure the initial measurement stability.The operator could have
extra time to detect before the test start. If there is no
opening closing mechanism, the flammable samples are easy to burn
too early. So this extra time is very important for the
operator.
1.7,The sample holder -The sample size is 100mm x 100mm, and
thickness is not exceed 50mm;The central portion of the sample
about 50mm*50mm is exposed to the heating cone center and
deviation is ±1%.
1.8,Weighting system -quality is measured by the strain gauge
load cell test, accuracy up to 0.1g. Equipped with swift
electronic weighing parts,mechanical stop fixture can avoid
moving damage, to ensure the equipment longevity.Weighing range
is 0 ~ 3kg.