WEMAC customized optimization design according to the raw water
quality report,effluent quality requirements and the actual needs
of customers, and customer can also choose the standardized
design from WEMAC. The output water quality can meet the
requirements of Chinese Pharmacopoeia(CP2020), United States
Pharmacopoeia (USP43) and European Pharmacopoeia (EP10) for
purified water or high purity water according to different system
configurations.
1. Modular design, compact structure, beautiful layout,
convenient operation and maintenance.
2. The double softeners in pretreatment unit can realize series
operation and alternate regeneration by using valve group. Each
water softener has 100% water supply capacity. The whole process
of softener operation, backwashing, salt absorption, regeneration
and washing is fully automatic and programmed.
3.Frequency conversion control is adopted for raw water pump, RO1
and RO2 high-pressure pumps, which can not only realize different
pressure control of filter and softener under various operating
conditions, but also realize low-speed and small circulation of
produced water in system standby time, greatly reducing the
probability of microbial breeding and effectively saving
energy.
4. The terminal water production of the system adopts a
dual-channel water supply and single-channel circulation mode,
that is, when the product water is qualified, it enters the
purified water storage tank through two pipelines. While when the
product water is unqualified, the product water circulates
through the two pipelines and then flows back to the middle water
storage tank. When the purified water storage tank is full, it
will automatically switch to the circulation pipeline operation,
which effectively avoids the existence of empty pipes and ensures
that there is no dead water.
5. The middle water storage tank is used as the buffer tank to
realize online cleaning, eliminating the separate cleaning
system. The system can choose thermal disinfection RO membrane
and thermal disinfection EDI to realize online hot water
sanitization of the whole system.
6. As far as possible, use stainless steel pipes to directly
stretch the elbow to avoid welding seam. Welding parts of
pipelines and accessories should be automatically welded with
argon protection(single-side welding and double-side forming
process) to ensure welding quality, and electrochemical polishing
after welding.
7. Provide endoscopy photos, solder joint diagram, pressure test
and pickling passivation report, system design documents and
other verification data.
8. The control system adopts HMI+PLC fully automatic control, and
the operation interface is simple. Various communication modes
are available. Control system authority levels: at least three
levels of authority can be set.
9. Online monitoring of parameters such as conductivity,
temperature and flow. The recorder can choose a paperless
recorder or a paper recorder to record and print key
parameters.
10. The control system can be optionally equipped with electronic
signatures and electronic records, so that the system control has
an audit trail function, and meets the requirements of GAMP 5 and
21 CFR PART
Reverse osmosis mainly uses the permeation principle of a
semi-permeable membrane to apply a pressure to it in a certain
way. The force opposite to the natural permeation direction makes
the water in the concentrated solution penetrate into the dilute
solution. This method is called reverse osmosis. The device
composed of reverse osmosis elements is a reverse osmosis device.
Applied to pure water in electronics, medicine, food and other
industries; purification and preparation of water for textiles
and chemical industries; purification and preparation of water
for food and beverage and brewing process water; concentration
and recovery of useful substances in aqueous solutions in
industrial production; power plants, etc. Pre-desalination
treatment of make-up water for high-pressure boilers of
enterprises; desalination of brackish water and seawater; as a
first-level desalination equipment for high-purity water
production.
Process characteristics of pure water prepared by two-stage
reverse osmosis:
Suitable for areas with low salt content in raw water
Low total carbon content (organic matter) in water
production
Pollution-free emissions
The structure is relatively simple
Purified water preparation process:
Pre-treatment + RO1 + RO2+EDI
Optional disinfection methods: activated carbon pasteurization,
CIP cleaning system, distribution system ozone sterilization,
distribution system pasteurization, distribution system pure
steam sterilization.
Remarks: The water system system is customized according to user
requirements (URS)