Our company is a renowned Manufacturer, Exporter and
Supplier of
Pre Compressed Spring Hanger (25 mm) The Pre
Compressed Spring Hanger is extensively used in
suspension of water pipe lines and seismically restrained
rotating equipment. The frame of our Pre Compressed
Spring Hanger is made of G.I. Steel and powder coated to
100 microns paint thickness (exceeds 1000 hours of salt
spray test), conforming to ASTM B 117 standard. Our
hanger is designed with a printed deflection scale to
indicate total spring deflection. We specialize in
catering to the bulk requirements of Pre Compressed
Spring Hanger with utmost ease.
Compliance
-
Designed to BS 1726 1 : 1987.
-
Tolerance to BS 1726-1 : 2002.
-
SAE and Ashrae Guidelines for vibration isolation
Features
-
Spring diameter to height ratios are designed to ensure
that spring will never buckle even when fully loaded.
-
Suspension rod misalignment (30 degree arc) is
compensated in hanger design.
-
Direct connection to lower suspension rod by means of a
threaded rod coupler.
-
Printed deflection scale to indicate total spring
deflectionl.
-
Pre compressed spring effectively minimizes transfer of
variations in pipe load during filling of pipes thus
protecting equipment connections / Flexible joints and
also prevents overloading of the main equipment
isolators.
-
Locking rubber bush centralizes the spring and prevents
dislocation.
-
Springs are powder coated with appropriate color coding
to facilitate identification.
-
Frame is made of G.I. Steel and powder coated to 100
microns paint thickness (exceeds 1000 hours of salt
spray test) and conforming to ASTM B 117.
Option
-
Frame Hot dip galvanised (Prefix part Number with
"HDG").
-
Spring Neoprene Coated (Prefix Part number with "N").
-
Spring Plastic coated (Prefix part Number with "P").
selection / Ordering
-
Point load (Calculated to include all variables such as
weight of water in pipe lines etc if applicable).
Installation Guide Lines