Place of Origin | Shandong, China | Brand Name | CAMELSTEEL |
Model Number | CGCC | Application | Construction |
Width | 40-1250 mm or as your requirement, 10-1250mm | Alloy Or Not | Is Alloy |
Grade | 1000 Series | Surface Treatment | Embossed |
Temper | O - H112 | Tolerance | u00b15% |
Processing Service | Bending, Decoiling, Welding, Punching, Cutting, Galvanized Coil | Product Name | PPGI Prepainted Galvanized Steel Coil 0.4mm Color Coated |
Coil OD | as your required | Technique | Cold Rolled |
Surface treatment | galvanized,coated,etc | Thickness of top coating | 20-25um |
Zinc coating | 40-275g/m2 | Coil weight | 3-8 tons |
Tensile Strength | 320-460/M2 | Shipment | By bulk vessel or By container |
Galvanized coating can be
specially as customers' requirement
Used for low pressure liquid
delivery such as water,gas and oil
The products apply to
various anticorrosive pipes
Zibo Camel Material Co.Ltd is both manufacter and trading company.
1.15 years production experience
2.Product be exported to more than 30 countries
3.2 prepainted galvanized steel production lines and 1 galvanized steel production line.
Specification | ||
Name | PPGI steel coil | PPGL steel coil |
Standard |
GB/T-12754 JIS G 3312 EN 10169 ASTM A755 |
GB/T-12754 JIS G 3312 EN 10169 ASTM A755 |
Grade |
CGCC TDC51D+Z |
CGCC TDC51D+AZ |
Thickness | 0.12-1.5mm (±0.02mm) | 0.12-1.5mm (±0.02mm) |
Width | 30-1250mm (±2mm) | |
Length | Coil or as Customers' requirement | |
Zinc/Aluzinc coating | Zn 40g/sm-275g/sm | Alu-zinc 40-150g/sm |
Coil weight | 3-5tons or As your requirement | |
Hardness | CQ/FH/As your requirement (G300-G550) | |
Painting | prime : 5μm | prime : 5μm |
top coating : 7--20μm | top coating : 7--20μm | |
Back coating | 7 --15μm | 7 --15μm |
Color | As RAL or your requirement | |
Surface Treatment | With plastic film , Chromated, Wrinkle, Matt, Decorate, Sand surface, Highlight. | |
Certification | ISO9001,BV,SGS, | |
Application | Structural use ,roofing, corrugated roofing, commercial use, household appliance, industry |
1.Each bare coil to be
securely tied with two bandst hrough the eye of coil(ornot)
and one
circumferential.
2.The contact points of
these bands on the coil edge to be protect with edge
protectors.
3.Coil then to be
properly wrapped with water proof/resistant paper,it then
to be properly and
completely metal
wrapped.