OKK HSS electric mortar mixer

               electric mortar mixer 

 OKK HSS  electric mortar mixer :

1.The purpose of the  electric mortar mixer is  the  "two high and two low'' that is high uniformity, high yield, low energy consumption, low noise.

2.The mixer with double period of 180 degrees of special material screw shaft structure, around the mixing cylinder cylinder, from left to right, from right to left, in turn, in turn, and the material has been implemented in boiling stir no dead Angle.

3.Replaceable blade fixed on the screw shaft, according to the needs of the hybrid materials, can be equipped with wear-resistant alloy blade, adjustable spacing.

4.Stir in the device is equipped with many fly knife, according to the need frequency

Mix cylinder with multiple feed port (according to actual needs), large discharge port, air port, access port, in machine sampling device. conversion control speed, steering Angle and material orbit instead, moment to many scattered, especially suitable for fiber mixture.

5.Double speed dynamic reduction stand and the cylinder direct connection, compact structure, smooth, no vibration during operation are, low noise.

6.Mixing cylinder material: manganese steel, stainless steel, large mixer can the manganese steel lining stainless steel plate. (the user can according to the conditions need to specify the corresponding material

The  instruction of the electric mortar mixer :

HSS Synchronous positive &negative powder mixer profile

Mixer purpose: "two high and two low"==high uniformity, high yield, low energy consumption, low noise.

HSS series synchronous positive &negative powder mixer type interpretation.

Such as: HSS6000S:

“H”:Representative efficient new.

“S”: On behalf of the mixing barrel outer screw shaft power. “S”: On behalf of the mixing barrel of his power.

“6000”: On behalf of the mixing barrel volume.

“S”:On behalf of the enhanced (applicable to material proportion of greater than 1 above).

Synchronous positive &negative powder mixer structure introduced

The mixing with double period of 180 degrees of special material screw shaft structure, around the mixing cylinder cylinder, from left to right, from right to left, in turn, in turn, and the material has been implemented in boiling stir no dead Angle.

Replaceable blade fixed on the screw shaft, according to the needs of the hybrid materials, can be equipped with wear-resistant alloy blade, adjustable spacing.

Stir in the device is equipped with many fly knife, according to the need frequency conversion control speed, steering Angle and material orbit instead, moment to many scattered, especially suitable for fiber mixture.

Double speed dynamic reduction stand and the cylinder direct connection, compact structure, smooth, no vibration during operation are, low noise.

Mix cylinder with multiple feed port (according to actual needs), large discharge port, air port, access port, in machine sampling device.

Mixing cylinder material: manganese steel, stainless steel, large mixer can the manganese steel lining stainless steel plate. (the user can according to the conditions need to specify the corresponding material) 

Service voltage :380 V, 50 Hz

Control voltage:230 V, 50 Hz

DC Auxiliary signal voltage :24 V