CAS No. | XY30166014 | Other Names | Sealing compounds |
Place of Origin | Shanghai, China | Classification | Other Adhesives |
Main Raw Material | silicone | Usage | Transportation, Industrial pipeline |
Brand Name | XIYOU | Model Number | NO.14 |
Type | Fast curing |
Type | XiYou NO.14 |
Specification |
20*85mm |
Temperature Resistance | -200℃~450℃ |
Injection Pressure |
5MPa |
Colour |
blue |
Curing Type |
Fast curing |
Applicable Medium |
Suitable for substation insulation gas (sulphur hexafluoride), acid, alkali, ammonia, ester, alcohol and oxygen, liquid nitrogen, liquid oxygen, liquid ammonia and other low temperature media, especially for valve packing and screw hole injection effect is more obvious |
Online leak sealing plugging sealant is an industrial pipeline sealing product. The product is divided into three categories: fast curing, slow curing and non curing. It is used for sealing filler of fixture, so as to seal the leaking part. It needs to select the corresponding rubber rod according to different temperature and medium to operate.
1. The gap between the clamps is too large, causing the sealant to flow out of the gap.
Solution: Make it strictly according to the sample of the fixture, narrow the gap, or use the copper wire glue stick to make up the gap.
2.During glue injection, the glue bar is not compressed more tightly, and there are air bubbles or gaps in the middle.
Solution: when injecting glue, inject glue every 10 cm from one side to seal. After fully compressing and filling, inject more than half glue stick to make internal compression more tight.
1. OEM Manufacturing welcome: Product, Package,label.
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.