Nickel Wire Mesh

Product Details

Nickel Wire Mesh

Nickel wire mesh, It means the metal mesh products made of high purity nickel material (nickel wire, nickel plate, nickel foil...) with the nickel content of 99.5% or more.

According to the production process, the products are divided into the following types:

A.Nickel wire woven mesh: metal mesh woven by nickel wire (warp and weft);

B.Nickel wire knitted mesh: knit mesh woven by nickel wire (hook knitting);

C.Nickel stretching mesh: rhombus mesh by stamping and stretching from nickel plate, nickel foil.

D.Nickel punching mesh: Various hole shapes metal mesh through stamping from nickel plate, nickel foil;

Main Materials: N4, N6; N02200

Executive standard: GB/T 5235; ASTM B162

The main nickel content of N6 material is more than 99.5%. The nickel wire mesh used in N4 material can be completely replaced by the nickel wire mesh made of N6 material; N6 material which meets the requirements of GB/T 5235 can also replace N02200 material which meets the requirements of ASTM B162.

Detailed introduction of products

Nickel mesh has good performance in corrosion resistance, conductivity and shielding. It is mainly used in the production of alkali and hydrogen electrolysis cell electrodes, battery electrodes, current collecting mesh, shielding radiation, special gas liquid filtration, etc. It is widely used in new energy power generation, petroleum, chemical, aerospace and other industries.

1. Nickel mesh is made of nickel wire through warp and weft woven, mesh holes are generally the square hole.

The main specifications are 20 mesh, 30 mesh, 40 mesh, 60 mesh, 150 mesh, 300 mesh, etc. The wire diameter ranges from 0.03 to 0.4 mm. After surface coating treatment, it is applied to the alkali, hydrogen production and new energy battery industries.