XM1303K road milling machine is a high-performance 1.3m-wide
milling machine mainly used for the digging and renovation of
asphalt concrete pavements in highways, downtown roads,
airports, cargo yards, and parking lots.
* The milling drum in diameter of 930mm is installed to
achieve the 300mm maximum miling depth and remove the whole
asphalt concrete pavement by single cycle.
* The 45m/min working speed is higher than the like
products. Three working speeds are provided to achieve more
accurate matching between working speed and working
load.
* The milling drum is driven by mechanical belt to
achieve higher drive efficiency than hydraulic drive. The
super -high capacity water tank and fuel tank (860L and
450L respectively) guarantee longer continuous working
time and reduce the down time.
* The intelligent sprinkling control technology is
applied so that the sprinkling is turned off
automatically at the stop of milling and is turned on
automatically at the restart of milling to save the
manual operation steps.