Drilling motors, also known as drilling mud motors or positive-displacement motors, are types of power tools used in drilling operations, particularly in the oil and gas industry. Unlike traditional drill bits that rely solely on rotating the drill string to create the drilling action, drilling motors employ a different mechanism.
1.Bent Housing Motor
We can provide fixed bend motor, single bend motor, double bend motor and adjustable bend housing motors.(adjustable angle from 0-3°) which can meet different kickoff requirement,
2. High Temperature Motor
Drilling motor Temp. range are ≤120℃,120-150℃ and 150-175℃which can meet different well running condition even in very harshest environment.
3.Hollow Rotor Motor
To increase hydraulic horsepower and upward speed of mud stream, rotor is manufactured into hollow rotor with nozzles. Thus, motor total flow rate is equal to the sum of the flow rate through seal cavity and rotor.
4. Even Wall Motor
Even wall motor not only enhances the impact resistance and deformation resistance of the rubber on the inner surface of the stator housing, but also the rubber will not cause problems such as rubber aging and rubber drop during the vulcanization process, so that the rubber vulcanization effect can be achieved better to ensure the service life of drilling motor. Under the same pressure drop, the size of the motor can be shortened and mud motor kick off rate can be further improved.
5.Rotor Coating Technology
Regular chrome coating could be adopted as clients requirement. Also we can do Tungsten carbide coating on rotor surface which can enable the rotor to work normally in saturated saltwater mud and to prevent the corrosion of chrome plated rotor in saturated saltwater.
>>Parameter Table
ModelUnit5LZ43×7.0V5LZ54×7.0VI5LZ60×7.0V5LZ73×7.0III5LZ73×7.0V5LZ89×7.0III5LZ95×7.0IV5LZ95×7.0VBit SizeODABHLobeStagePressureFlow RateFlow Per RevolutionBit SpeedTorqueMax.torqueOutput PowerWeight on BitMax. Weightin | 1 7/8-3 | 2 3/8-3 1/2 | 3 1/8-4 3/8 | 3 3/8-4 3/8 | 3 3/8-4 3/8 | 4 1/2-6 | 4 5/8-6 | 4 5/8-6 |
mm | 44 | 56 | 60.5 | 74 | 74 | 89 | 96 | 96 |
° | - | - | - | 0-3 | 0-3 | 0-3 | 0-4 | 0-4 |
5/6 | 5/6 | 5/6 | 5/6 | 5/6 | 5/6 | 5/6 | 5/6 | |
5 | 6 | 5 | 3 | 5 | 3 | 4 | 5 | |
Mpa | 4 | 4.8 | 4 | 2.4 | 4 | 2.4 | 3.2 | 4 |
l/s | 1-1.7-2.5 | 1.3-2.2-3.2 | 1.3-2.2-3.2 | 2-5-7 | 3-6-9 | 3-6.5-10 | 5-8-12 | 5.4-9.3-13.2 |
l/r | 0.27 | 0.34 | 0.56 | 0.9 | 1.07 | 1.53 | 2.5 | 2.6 |
rpm | 222-378-555 | 230-390-565 | 140-237-344 | 133-333-467 | 168-336-504 | 118-255-392 | 120-192-288 | 126-217-308 |
N·m | 150 | 320 | 438 | 320 | 820 | 730 | 1590 | 2070 |
N·m | 225 | 480 | 657 | 480 | 1230 | 1095 | 2385 | 3105 |
Kw | 2.6-6.4 | 4.4-10.8 | 6.4-15.7 | 4.8-17 | 15-43 | 10-30 | 20-48 | 27-66 |
KN | 2.5 | 4 | 4 | 15 | 15 | 20 | 25 | 25 |
KN | 6 | 8 | 8 | 20 | 20 | 30 | 50 | 50 |
up | 1 AMMT | 1 1/2 REG | 1 1/2 REG | 2 3/8 TBG | 2 3/8 TBG | 2 3/8 REG | 2 7/8 REG | 2 7/8 REG |
1 AMMT | 1 1/2 REG | 1 1/2 REG | 2 3/8 REG | 2 3/8 REG | 2 3/8 REG | 2 7/8 REG | 2 7/8 REG | |
mm | 2967 | 3587 | 4153 | 3670 | 4189 | 3430 | 4835 | 5630 |
Kg | 25 | 56 | 64 | 85 | 100 | 128 | 160 | 170 |
in | 5 7/8-7 7/8 | 5 7/8-7 7/8 | 5 7/8-7 7/8 | 5 7/8-7 7/8 | 5 7/8-7 7/8 | 5 7/8-7 7/8 | 8 3/8-9 7/8 | 8 3/8-9 7/8 |
mm | 122 | 122 | 122 | 127 | 127 | 127 | 167 | 167 |
° | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 |
5/6 | 5/6 | 7/8 | 5/6 | 5/6 | 7/8 | 7/8 | 5/6 | |
4 | 5 | 3 | 5 | 8 | 4 | 5 | 5 | |
Mpa | 3.6 | 4 | 3 | 4 | 6.5 | 3.2 | 4 | 4 |
l/s | 10-14-18 | 9-13-16 | 10-15-19 | 9-13-16 | 9.5-13-19 | 9-14-18 | 21.5-30-38 | 18-24-28 |
l/r | 5 | 4.8 | 7.6 | 6 | 3.9 | 6.9 | 14.3 | 10 |
rpm | 120-170-220 | 110-162-200 | 80-118-150 | 90-130-160 | 145-198-290 | 78-121-156 | 90-126-160 | 106-142-165 |
N·m | 2800 | 2280 | 3680 | 3040 | 4160 | 3580 | 7400 | 6200 |
N·m | 4900 | 3990 | 6620 | 5320 | 6240 | 6265 | 13320 | 10850 |
Kw | 40-72 | 36-64 | 32-62 | 36-64 | 63-126 | 41-81 | 86-152 | 72-112 |
KN | 40 | 40 | 40 | 50 | 50 | 50 | 100 | 100 |
KN | 60 | 60 | 60 | 70 | 70 | 70 | 160 | 160 |
up | 3 1/2REG | 3 1/2REG | 3 1/2REG | 3 1/2REG | 3 1/2REG | 3 1/2REG | 4 1/2REG | 4 1/2REG |
3 1/2REG | 3 1/2REG | 3 1/2REG | 3 1/2REG | 3 1/2REG | 3 1/2REG | 4 1/2REG | 4 1/2REG | |
mm | 6517 | 5715 | 7125 | 6547 | 8431 | 6547 | 8233 | 8317 |
Kg | 374 | 333 | 409 | 441 | 566 | 441 | 1028 | 1044 |
in | 8 3/8-9 7/8 | 8 3/8-9 7/8 | 8 3/8-9 7/8 | 8 3/8-9 7/8 | 9 7/8-12 1/4 | 9 7/8-12 1/4 | 9 7/8-12 1/4 | 9 7/8-12 1/4 |
mm | 174 | 174 | 174 | 174 | 197 | 197 | 197 | 197 |
° | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 |
5/6 | 5/6 | 7/8 | 7/8 | 5/6 | 5/6 | 7/8 | 7/8 | |
5 | 6 | 5 | 6 | 5 | 6 | 4 | 5 | |
Mpa | 4 | 4.8 | 4 | 4.8 | 4 | 5 | 3.2 | 4 |
l/s | 24-28-32 | 24-28-32 | 25-32-36 | 25-32-36 | 25-34-40 | 25-40-55 | 30-45-65 | 25-34-40 |
l/r | 12 | 12 | 15 | 15 | 15 | 13 | 25.7 | 16.8 |
rpm | 120-140-160 | 120-140-160 | 100-128-144 | 100-128-144 | 100-136-160 | 115-183-250 | 70-105-150 | 90-120-144 |
N·m | 6600 | 7800 | 7860 | 9500 | 7800 | 10000 | 11000 | 8500 |
N·m | 10560 | 12480 | 13780 | 16650 | 14040 | 15000 | 19800 | 14875 |
Kw | 96-142 | 115-146 | 102-152 | 120-182 | 100-160 | 120-192 | 135-192 | 112-160 |
KN | 100 | 100 | 100 | 100 | 170 | 170 | 170 | 170 |
KN | 180 | 180 | 180 | 180 | 250 | 250 | 250 | 250 |
up | 4 1/2REG | 4 1/2REG | 4 1/2REG | 4 1/2REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG |
4 1/2REG | 4 1/2REG | 4 1/2REG | 4 1/2REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | |
mm | 8180 | 8780 | 8160 | 8780 | 8066 | 8833 | 8433 | 8066 |
Kg | 1122 | 1168 | 1138 | 1246 | 1392 | 1454 | 1483 | 1392 |
in | 9 7/8-12 1/4 | 9 7/8-12 1/4 | 9 7/8-12 1/4 | 9 7/8-12 1/4 | 12 1/4-17 1/2 | 12 1/4-17 1/2 | 14 3/4-26 | 14 3/4-26 |
mm | 203 | 203 | 203 | 203 | 244 | 244 | 286 | 286 |
° | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 | 0-3 |
5/6 | 5/6 | 7/8 | 7/8 | 7/8 | 5/6 | 5/6 | 5/6 | |
5 | 6 | 4 | 5 | 4 | 5 | 4 | 5 | |
Mpa | 4 | 5 | 3.2 | 4 | 3.2 | 4 | 3.2 | 4 |
l/s | 25-34-40 | 25-40-55 | 30-45-65 | 25-34-40 | 40-53-65 | 40-50-60 | 55-65-80 | 37.5-55-70 |
l/r | 15 | 13.1 | 25.7 | 16.8 | 33.3 | 25.4 | 40.2 | 31.5 |
rpm | 100-136-160 | 115-183-250 | 70-105-150 | 90-120-144 | 72-95-117 | 95-118-140 | 82-97-118 | 71-105-133 |
N·m | 7800 | 10000 | 11000 | 8500 | 17000 | 14700 | 18800 | 18500 |
N·m | 14040 | 15000 | 19800 | 14875 | 29750 | 25730 | 33840 | 33300 |
Kw | 100-160 | 120-192 | 135-192 | 112-160 | 128-228 | 134-200 | 176-268 | 110-201 |
KN | 170 | 170 | 170 | 170 | 180 | 180 | 200 | 200 |
KN | 250 | 250 | 250 | 250 | 280 | 280 | 300 | 300 |
up | 6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 7 5/8REG | 7 5/8REG |
6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 6 5/8REG | 7 5/8REG | 7 5/8REG | |
mm | 8066 | 8833 | 8433 | 8066 | 9398 | 9188 | 9130 | 8750 |
Kg | 1462 | 1585 | 1563 | 1520 | 2409 | 2289 | 2900 | 2817 |