Main and Standby Fiber Monitoring OLP XH-OLP-1-1-M

Port	Nanning
Packaging	carton
Lead Time	7

Contact Now

Product Details

XH-OLP-1-1-M optical protection module is mainly used in optical fiber transmission, the main fiber and the backup fiber fault judgment automatic switching. In the optical network signal link, when the main fiber optical signal exceeds the set optical power alarm value (such as power down the set threshold value, including no light), the module automatically switches from the main fiber to the backup fiber optical path, and vice versa when the backup fiber fails to break the fiber, the module automatically switches back to the main fiber (the module detects whether the optical path is normal, and only normal optical path can be automatically switched). The module supports RJ45 Ethernet and serial RS-232 communication, and the module status information can be queried by command.

Features:

High reliability with low insertion loss

Real-time monitoring of main and backup fiber optical signal status

Manual switching and automatic switching of optical paths are available

Support Ethernet and serial communication control

Parameter:

Parameter	Parameter Value
Model	XH-OLP-1-1-M
insertion Loss(dB)	Typ:1.0 Max:1.5
Wavelength Range(nm)	1260~1650
Monitoring wavelength(nm)	1550nm
Return Loss(dB)	≥50
Crosstalk(dB)	≥55
Optical power threshold automatic switching value(dBm)	Can be set -10,-15,-20,-25,-30,-35
Fiber connection interface	FC/PC	FC/APC
Power down state	Maintain optical path
Communication method	RJ45 or RS-232
Lifetime(Times)	≥107
Switching Time(ms)	≤10
Transmitted power(mW)	≤500
Operating Voltage(V)	5
Operating Temperature(ºC)	-20~+70
Storage Temperature(ºC)	-40~+85
Dimensions(mm)	(L)104.0×(W)120×(H)28±0.2mm