Laboratory Refrigerated Industrial Centrifuge Machine Decanter Disc Centrifuge Wastewater Treatment Equipment Solid Liquid Separator

Product Introduction

Disc centrifuge is a mechanical filter based on the principle of centrifugal sedimentation. It is widely used for the continuous separation of liquids with density difference and solid liquid mixture. The disc centrifuge features are high rotating speed, stable operation, fully closed design, low noise, and
superior separation efficiency.

Disc centrifuge is composed of inlet and outlet device, drum, vertical or horizontal shafts, housing, brake, motor, speed detector, etc. A centripetal
pump discharges the material after separation. With a high output pressure (0-0.5mpa), the material will be directly delivered to the downstream
equipment.

Features

1. All parts contacting with fluid are made by high standard stainless steel ( food level).
2.The drum of the JX disc centrifuge is precisely tested with dynamic balance. Large spiral gears are used in the transmission system to guarantee
stable operation, overload-proof, small vibration, safety running and convenient operation.
3. The bearings are from famous Swedish brand, thoroughly ensuring the operation precision.
4. Disc centrifuge can also achieve program operation with PLC control.

Working principle

When the raw liquid was fed into the high-speed rotating drum, it enters the disc stack along the channel. With the effect of strong centrifugal force, raw liquid with different densities forms three dynamic concentric rings. Small amounts of solid particles with most significant density keep moving outward and pile up on the drum, forming the outmost layer. Heavy liquid with bigger viscosity is thrown to the lower surface of the disc and then slip out of the disc area to create the middle layer. Light liquid with smaller density keeps moving toward the drum center and forms the innermost layer. Finally, the components of each layer will be discharged from their channels, respectively.

Professional Services