Port | Shanghai |
Packaging | carton box |
Lead Time | 7-10days |
Encoder Type | KZ48 Servo Motor Rotary Encoder | Through hole shaft diameter | 9mm( taper 1:10) |
Hollow shaft type | hollow conical shaft | Resolution | 50ppr(Min) to 8192ppr(Max) |
Cable length | 500mm | Optional supply voltage | DC5V & DC8-30V |
Shaft load | Radial 50N; Axial 30N | Net weight | About 140g (with package) |
GND | not connect to encoder | Material | Dia cast aluminium |
KZ48 China encoder manufacturer dc servo motor with 250 ppr DC12V cone shaft 9mm TTL
Lead time
3-5 working days for sample after full paid
7-15 days for mass production after full paid
Process of payment:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
Items | Basic parameters |
Brand | HENGXIANG |
Encoder type | Incremental encoder |
External diameter | 48mm |
Thickness | 34mm |
Installation dimension | 40mm(spring plate 48T40) |
Hollow shaft type | hollow conical shaft |
Hollow shaft diameter | 9mm( taper 1:10) |
Resolution | 50;60;100;200;256;300;360;500;512;600;720;1000; 1024;1200;2000;2048;2500;3600;4096;5000;8192;10000 |
1000/4;1000/6;1000/8;1024/4;1024/6;1024/8;2048/4;2048/6;2048/8;2500/4;2500/6;2500/8;4096/4;4096/6;4096/8;8192/4;8192/6;8192/8;10000/6;10000/8 | |
Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
Supply voltage | DC5V ; DC8--30V |
Outlettype | Cable out from side |
Output mode | NPN/PNP(Open Collector Output) |
Voltage output | |
Push-pull output | |
line drive (26LS31) TTL | |
line drive(DC8-30V) HTL | |
TTL(DC5V) phase ABZ are back of phase UVW | |
Protection grade | IP40 |
Cable length | 500mm |
Consumption current | 100mA MAX |
Top response frenquency | 100KHZ |
Allowable ripple | ≤3%rms |
Load Voltage | ≤DC30V |
Insulation strength | AC500V 60s |
Insulation resistance | 10MΩ |
GND | not connect to encoder |
Mark to Space ratio | 45% to 55% |
starting torque | less than 9.8x 10-3 N.m |
Intertia moment | less than 6.5x 10-6kg.m2 |
Shaft load | Radial 50N; Axial 30N |
Top REV | 5000RPM |
Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
Environmental temperature | Operating:-20 ~+85°;storage:-25 ~+90° |
Enviromental humidity | Operating and storage: 35-85%RH(noncondensing) |
Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
Sock(endure) | 490m/s2 ,11 ms three times for X,Y,Z direction individually |
Material | Dia cast aluminium |
Certification | CE |
package | Carton box |
Net weight | About 140g (with package) |
About Encoder Vibration
Vibration acting on an encoder always cause wrong pulse easily.
So we have to pay more attention to encoder working place.
The more pulse per round, the narrower groovy spacing of grating, ore effect to encoder by vibration, when motor speed is low or even stopped, vibration acting on encoder shaft or encoder shell would cause grating vibration, in this way, encoder might show wrong pulse signal.
Room 301, Building 7, No. 115, No. 1276 Lane Nanle Road, Songjiang District, Shanghai City, China