Innosilicon A10 pro 500m

Ethereum Miner Machine , Innosilicon A10 Pro 500m 5GB 6GB

Product Name	Innosilicon A10 pro 500m
memory	5GB 6GB
Algorithm	EtHash
Hashrate	500m
Power Consumption	860W 950W

Also known as Release Size Weight Noise level Fan(s) Power Voltage Interface Memory Temperature Humidity

ETH Miner King A10 Pro

May 2020

136 x 285 x 362mm

8100g

75db

2

860W 950W

12V

Ethernet

5G 6G RAM

5 - 40 °C

5 - 95 %

Innosilicon A10 PRO (5G 500M)

Innosilicon A10 Pro ETH Miner is from the Innosilicon mining EtHash algorithm and has a maximum hash rate of 500MH/s. The power consumption is 860W, which is considered power efficient and friendly. It’s one of the few miners whose power consumption is below 1000W. With power being the main concern for miners, the A10 Pro ETH Miner is a better alternative.

Most miners also refer to it as the ETH King A10 Pro, which was May 2020. Some of the mineable coins include Etherium classic, Etherium, Musicoin, and Ubiq. Some of the mining pools to find this platform include AntPool, Ethermine, NanoPool, Pooling, and ViaBTC. The material that is used to create this miner is metal. The chip Count is 342, and the noise level is set at 75db. The Innosilicon A10 Pro ETH Miner is also a favorite due to its noise capacity.

The power of the miner is set at a maximum of 860W and uses the Ethernet interface. The overall weight of the miner is 8.1 Kg and has a cooling fan of 12038. Temperature levels are set at 0 to 40 degrees centigrade. Humidity levels are set at 10 to 90 percent.

Innosilicon A10 PRO (6G 500M)

Innosilicon A10 Pro ETH miner with 6G memory is an upgraded version optimized for ETH mining, performing with a power-efficient hash rate of 500MH/S at 950W.

Hashrate:500MH/s (±5%)
Power Consumption:950W(±10%, on wall, with 93% efficiency PSU, 25℃ temperature)
Dimensions:(L)360mm*(W)136mm*(H)282mm
Net Weight:8.6Kg
Internet connection:Ethernet
Ambient Temperature:0°C to 40°C

Please note that they are not new miners and after upgrading the machine may not be refurbished, if you expect a high-standard appearance, your discretion is strongly advised. Once the order is placed, it will be deemed as an acceptance.

Notice:
Please make sure your farm use proper cooling, dust filter and 10A AC cable to meet the proper operating condition requirements.
Humidity <75%, AC voltage 210~240V, Power supply AC input current 10A, dust <0.5 Mg/m3.

How about the Warranty?

A.180 days warranty for new machine.If it is within the warranty period, the original factory of the miners will be responsible for it. If it is out of warranty, we will provide paid maintenance service

B.For used miners,we will send testing video with SN code before shipment to make sure every miner is in a good state. And we will provide paid maintenance service after that.