Highway Guardrail is a metal beam passive barrier system mostly processed from corruguated steel plates 10 gauge and 12 gauge, through flattening, punching, hot dipped galvanizing and shearing processes, into solid metal beams with symmetrical shapes of waves, with a radiums ranging from 5’ to 60’, specially installed along the highway road side, bridges, median openings and viaducts for safety and reducing the potential danger of vehicle crashing.
We are an established manufacturer and supplier of matal beam Highway Guardrails in sets, and our products are manufactured with all the latest traffic regulations and signs available in every country to make the road and bridge safer.
We have worked as contractor and supplier for Highways, Road Development, Urban Planning, Transportaion Development Authorities and related companies in many countries for the supply of highway guard railing products, in Africa, and Asia, Europe and America. We also supply trading company, and contracting co. in supplying and installing a range of Aluminium and Steel guard railing system for Highway and Expressway Road Safety.
Design of Guard Rail Layout - We help design, furnish and install Highway Guardrail Project
The spacing of the guard rails shall be revised at bridges,
culverts, lighting post, traffic sing board and other special
sites.
Crash cushion barrier shall be provided at each exit
locations.
Wire cables can be used.
Chain link fence can be used for highway openings.
Our Highway Guardrails is supplied meeting following Quality / Standards:
Guardrails
Dimensions of guardrails and terminal sections as required or per
drawings.
Guardrails shall be supplied together with all bolts, nuts, washers and fixing materials required other than bolts for fixing to posts.
The W-beam rail element, backup plates, and
terminal sections, channel rail and splice plate shall be in
conformance with AASHTO M 183.
Beam rail elements and terminal sections shall
be galvanized in accordance with AASHTO M 180, Class A, Type 2.
The minimum average weight of Zinc coating shall be 2 ounce per
sq. foot. Bolts, nuts, washers, plates, rods and other hardware
shall be galvanized in accordance with ASTM A 153.
OR
Guardrails shall comply with the requirements of BS 149. When
galvanized guardrails are called for on the drawings or in the
Bill of Quantities, a hot-dip galvanized zinc coating that
complies with the requirements of BS 763 for coatings on Type A1
articles shall be applied.
All bolts, nuts and washers shall have a hot-dip galvanized zinc
coating that complies with the requirements of BS 763 for
coatings on Type C1 articles. Galvanized guardrails shall not be
nested when stacked for storage.
Guardrail Posts
Box beam posts shall conform to AASHTO-AGC-ARTBA A Guide to
Standardized Highway Barrier Hardware, 1995 Edition.
Posts shall have a top diameter of at least 150 mm. Posts with a
top diameter up to 230 mm will be acceptable, provided that posts
of widely varying diameter are not used together in the same
length of guardrail.
Posts shall be drilled and shaped as shown on the drawings and provided with the necessary bolts, nuts, washers and spacer posts for fixing.
Highway guardrail products:
Highway guardrail with trailing anchorage
Galvanized W-beam guardrails for highway protection
Guardrail Take-Off
10 gauge metal beam guardrail
12 gauge curved guardrail from 5' to 60' radii, a wide variety of
terminal end
Highway guard rails for highway projects with bridges, emergency
median opening and viaducts
This syetem is a post spacing guardrail sets with steel post trailing terminal, a longitudinal highway barrier designed to reduce the severity of run-off-road collisions.
Highway Guardrail with guardrail trailing anchorage composed of
through rail element, guardrail post, strand wire cables. 3/4"
stranded wire cable and accessories.
steel rail post W6x9.
Highway Guardrail as per attachment.
Description
W-Beam, 6'3" Galvanized
End Piece
5/8" x 1-1/4" Splice Bolt, Galvanised
2" x 1" Galvanized Washer
3" x 1 3/4" Rectangular Washer
5/8" x 9 1/2" Hex Bolt & Hex Nut
1-3/4" x 11/16" Galv Steel Washer
5/8" Round Washer Galv.
5/8" x 1-1/4" Recess Nut
Steel Guardrail Post W6x9, 6'
Steel Guardrail Post W6x9, 1'-2"
Highway bridge guardrail barrier is a kind of parapet wall barrier designed for construction of city / urban outer ring road bridges. We design and supply highway bridge parapet barrier for contractors and tender projects according to drawings and requirements.
Bridge rails including:
Guardrails on Steel Post Galvanized Steel
End sections
Spare parts
Design: Lap guardrail for traffic flow control
Drawing reference: Highway Bridge Parapet Wall Guardrails System