Application
* Safety area: vehicle license plate, car number plate,
embossed guide signages, embossed door number plate
etc.
* By embossing and coating with either transparent of opaque
inks or hot stamping tapes to produce attractive high-quality
license plates which enhance nighttime safety and the
legibility of the vehicle ID system.
Cleaning
Signs that require cleaning should be flushed with water,
then washed with a detergent solution and bristle brush or
sponge. Avoid pressure that may damage the sign face. Flush
with water following washing. Do not use solvents to clean
signs.
Storage
Store in a cool, dry area and use within one year after date
of receipt. Store rolls in original shipping carton or
suspend horizontally from a rod or pipe through the core.
Store sheets flat. Store color printed, pre-masked markings
at a temperature below 29.5°C (85 °F). If stored above this
temperature, blocking of the premask to the sheeting could
occur.
Shelf
Life
Unprinted sheet may be stored by the fabricator for a period
of up to one year and after printing, markings may be stored
for an additional period of up to six months. Sheeting and
markings must be stored in a clean area, free from excessive
moisture and direct sunlight, with ambient temperatures of 85
Fahrenheit (29.5°C) or less.
General
Performance Considerations
The performance and durability of Reflective Sheeting will
depend upon a number of factors including (but not limited
to):
selection, preparation and temperature of the
substrate
Application procedures
Geographic area
Exposure and atmospheric conditions (e.g. snow,
frost)
Correct combination of sheeting, ink and overlay
film
Ink formulation
Ink drying/curing methods
Cleaning and maintenance method