MOQ | 1 set |
Port | Ningbo |
Packaging | wooden case |
Lead Time | 25 |
Product Introduction
This machine is suitable for cutting cellophane, pet,opp,cpp,pe,ps,pvc, computer anti-counterfeiting label,electronic computer,optical material,film roll, foil roll,all kind of paper roll, film and all kinds of material after printing.
Detail Part:
1.Unwinding section
1、3 inch or 6 inch shaft-less integrated pneumatic cone tops are adopted for unwinding, manual pulling is needed for locking and positioning.
2、 Cylinders control feeding plates as they go up and down.
3、 10KG magnetic particles control the tension. They detect roll diameters automatically, and automatically stops if feeding is cut off or no feeding is detected.
4、 Feeding plates are equipped with automatic alignment systems, and the alignment point can be in accordance with inner printed edge or material outline.
5、 The Unwinding diameter is regularly set as 800mm
2.Traction section
1. A 120mm diameter mirror traction roller.
2. The traction roller power is 5.5 KW, and it is driven by two synchronizing wheels of two proportions. They increase the rotation speed of motor, thus reduce electrical cost.
3. Equipped with a 120mm passive pressing rubber roller and automatic pressing device.
3. Rewinding section
1、It adopts two 3 inch slip shafts to rewind. (two 6 inches slip shafts as backup)
2、It uses 2 sets of 3.7kw converter motors to drive rewinding.
3、The upper and lower shafts are equipped with pressure rollers to make the material winding smooth.
4、The pressure roller maintains a constant pressure, which is controlled by a precise pressure regulating valve.
5、It has 10 laser lights guid beam positioned infrared paper tube.
6.The speed of this machine is 10 to 350m/minute.
7. The maximum rewinding diameter is 600mm.
4. Slitting section
1.10 flat knives and 10 round knives
2.The cutter shaft automatically lifts and lowers the knives.
3.The slitting width is 30-1300mm.
5. Unloading section
1.A set of manual/automatic unloading sub-frame.
2.A set of waste edge winder.
Techinical specification:
Material width |
1300mm |
Material diameter |
¢800mm |
Rewinding diameter |
¢600mm |
Inner hole of paper tube |
3#6# |
Speed |
10-300m/min |
Divide |
300MM |
Total Power |
15KW |
Mechanical dimensions |
1890*2700*1600 mm |
Weight |
3500KG |
Machine pictures:
Packging:
Address:NO.9 ROAD 2,JIAOSHI INDUSTRIAL ZONE RUIAN WENZHOU CITY CHINA325205