MOQ | 1 set |
Port | Shanghai |
Packaging | plywood cases |
Lead Time | 15 days |
name | transformer oil purifier | color | blue |
Application:
Oils inside transformers are
mainly for insulating purpose- apart from which they also
suppress corona and arcing, and also act as coolants inside the
machines. These oils must be maintained absolutely clean and dry
in order to achieve and sustain the optimal insulating
performance and dielectric strength. Here rises the need for
transformer oil purification process. ASSEN ZYD
Transformer Oil Purifier Machine is the key to transformer
reliability, performance and longevity. Your transformer's
insulating oil should be free from moisture, dissolved gases and
particles that accumulate as the oil ages. Even some new oils may
require treatment to limit these contents to acceptable
levels.
Features:
1. Expectations on an effective oil plant for treatment of insulating oil.
2. Suitable for oil treatment, vacuum oil injection and cyclic hot oil drying in the installation and maintenance of large capacity transformers.
3. Easy and failsafe operation.
4. On-line measuring and recording of process parameters.
Technical Data
Parameters |
Unit |
ZYD-30 |
ZYD-50 |
ZYD-100 |
ZYD-150 |
ZYD-200 |
ZYD-250 |
ZYD-300 |
|
Flow rate |
L/min |
30 |
50 |
100 |
150 |
200 |
250 |
300 |
|
Working vacuum |
MPa |
0.08 ~ 0.099 |
|||||||
Working Pressure |
MPa |
≤0.3 |
|||||||
Temperature Range |
℃ |
20 ~ 80 |
|||||||
Power |
Three Phase 50HZ380V(as per the customer's requirements) |
||||||||
Working Noise |
dB(A) |
75 |
75 |
75 |
80 |
80 |
80 |
80 |
|
Heating Power |
kW |
30 |
30 |
45 |
60 |
75 |
90 |
120 |
|
Total Power |
kW |
35.5 |
37.5 |
52.5 |
71.4 |
86.5 |
102.5 |
135 |
|
Inlet/Outlet |
mm |
φ25 |
φ32 |
φ42 |
φ50 |
φ50 |
φ60 |
φ60 |
|
Weight |
kg |
600 |
800 |
1050 |
1400 |
1800 |
2000 |
2200 |
|
Overall |
Length |
mm |
1050 |
1100 |
1200 |
1450 |
1600 |
1800 |
1900 |
Width |
mm |
750 |
800 |
950 |
950 |
1100 |
1200 |
1200 |
|
Height |
mm |
1350 |
1400 |
1500 |
1650 |
1800 |
1900 |
1900 |
Aftre treatment
Moisture |
PPM |
≤3 |
Gas content |
% |
≤0.01 |
Impurity size |
μ |
≤1 (no free carbon) |
Breakdown voltage |
kV |
≥75 |
IFT |
dynes/cm |
≥40 |
Acid value |
mgKOH/g |
≤0.03 |
Dielectric loss factors |
tgδ(90°C) |
≤0.001 |
ASSEN warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of twenty (20) months from date of shipment or eighteen (18) months after the start-up of the system. ASSEN's obligation under this warranty is limited to repairing or furnishing, a similar part to replace any part, which was proven to be defective within the warranty period.