High Abrasion Resistant Ep Conveyor Belting

High Abrasion Resistant Ep Conveyor Belting

Product Desription






1. Specification

Rubber conveyor belt
1.Ply:1-10plies
2.Width:120-2200mm
3.Thickness: 6-40mm
4. Cover Tensile Strength: 9-25MPA

Specifiction/strength:
160N/mm-----3150N/mm
Width:
100mm---2200mm

Ep80 Ep100 Ep125 Ep200 Ep250 Ep300 Ep400 Ep500 Ep600
NN80 NN100 NN125 NN200 NN250 NN300 NN400 NN500 NN600

Advantage:
1. Natural rubber Thin belt body with high strength, light weight.
2. Anti-abrasive, impact resistant, corrosion resistant
3. Softy belt body, good flexibility, excellent trough.
4. Vulcanization molding
5. Long service life

Features
1.Excellent elasticity
2.Anti-impact
3.High-adhesion
4.Good flexibility
5.Trough ability
6.Better stability of size
7.Resistance to water

Application
rubber conveyor belt is widely used inHarbour (port),Metallurgy, Mining, Electricity, Coal, Foundries, Construction, Food, Cement, Fertilizer, Copper, Pig Iron Ores, Sponge Iron Reserves etc.

rubber conveyor belt has over 10 key types according to the use classification:

• Flat normal type
• Chevron Pattern type
• V-belt pattern type
• Nylon casing ply type
• Heat /cold resistant type
• Oil resistant type
• Flame resistant type ( self- extinguishing type)
• Chemical resistant type
• Anti shock type
• Anti-abrasive type
conveyor belt are primarily used in the following industries:
• Chemical industry
• Coal-fired power stations
• Iron and steel industry
• Quarries
• Recycling industry
• Sand and gravel industry
• Metallurgy
• Agriculture
• Cargo terminal and port
• Architecture field
• Logistics and other fields

Standards		Cover Rubber			Adhesion
		Tensile Strength	Elongation at break	Abrasion	Cover to Ply		Cover to Ply
DIN 22102		Mpa	%	mm3	N/mm		N/mm
					(<=1.5mm)		(>1.5mm)
DIN 22102-Z		15	350	250	3.5		4.5
DIN 22102-W		18	400	90	3.5		4.5
DIN 22102-Y		20	400	150	3.5		4.5
DIN 22102-X		25	450	120	3.5		4.5
Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm	N/mm	N/mm
				(<=1.9mm)	(>1.9mm)
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6
Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm	N/mm	N/mm
				(<=1.6mm)	(>1.6mm)
RMA-I	17	400		3	4.4	4
RMA-II	14	400		3	4.4	4
Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
SANS 1173	Mpa	%	mm3	N/mm		N/mm
A	18	400	70	5		7
C	20	400	150	5		7
M	25	450	120	5		7
N	17	400	150	5		7



Application