Application Instructions
The Retro-reflective sheet for vehicles is made of
red-white or other two colors stripe material.
Retro-reflective sheet can use for cars, trains, trucks,
bikes, tricar etc. If the vehicle has the guard, you can
affix Retro-reflective sheet on the guard, otherwise, the
Retro-reflective sheet should be affixed on the
motherboard, and then set up in the body of the vehicle.
Our Retro-reflective sheet and aluminum substrates should
be conditioned prior to application to provide a minimum
temperature of 65°F (18°C) throughout the roll or sheeting
stack.
Cleaning
Signs that require cleaning should be flushed with water,
then washed with a detergent solution and bristle brush or
sponge. Avoid pressure that may damage the sign face. Flush
with water following washing. Do not use solvents to clean
signs.
Storage
Store in a cool, dry area and use within one year after
date of receipt. Store rolls in original shipping carton or
suspend horizontally from a rod or pipe through the core.
Store sheets flat. Store color printed, pre-masked markings
at a temperature below 29.5°C (85 °F). If stored above this
temperature, blocking of the premask to the sheeting could
occur.
Shelf
Life
Unprinted sheet may be stored by the fabricator for a
period of up to one year and after printing, markings may
be stored for an additional period of up to six months.
Sheeting and markings must be stored in a clean area, free
from excessive moisture and direct sunlight, with ambient
temperatures of 85 Fahrenheit or less.
General
Performance Considerations
While no warranty is provided, Reflective Sheeting is
designed for multi-year outdoor applications. When sheeting
is applied, processed, and used as recommended, signs or
stickers should exhibit no significant peeling, chipping,
cracking or fading for three to five years depending upon
climate and geographic location