MOQ | 1 Piece/Pieces |
Applicable Industries | Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, farms, restaurant, HOME USE, Retail, Food Shop, Printing Shops, Construction w | Structure | SINGLE |
Material | STAINLESS STEEL, 20Cr, 20CrMnTi,20Cr | Operating Angle | Standard |
Place of Origin | Jiangsu, China | Brand Name | OEM |
Type | Universal Joint | Size | 30*55.1 Mm |
Color | Slivery |
GUM-93 Automotive Bearing 30 * 55.1 mm Car Parts Cross Bearing
Universal Joint Gum-93 Gu-350 Guis-59
Packaging Details: | inner packing:packed with plastic bag and paper box out packing:packed with carton and wooden pallets if customer require |
Delivery Detail: | 3-5 days after recieve the payment |
Car Parts Cross Bearing Universal Joint Gum-93 Gu-350 Guis-59
China auto part universal joint cross bearing
1.
Material: 20Cr steel
2. Tractors u joint cross
3. Low price, good quality
4. Long using, OEM offer
5. Various types of U-joints for different vehicles(Toyota/Nissan/Volvo/Scania/Mazda/Hyundai.....)
Description :
The
Universal joint is intended for the flex joint of the car
engine with the driving axle through the driveshaft. It
represents two perpendicular axles, roller bearings
supported, and installing to universal-joint fork.
The U-joints made in concern 'Electromash' with 'Kratumant'
group are the products of high quality. They are made from
high alloyed steel with the new up-to-date equipment.
The U-Joint with the help of drive shaft connects the
transmission to the rear drive axle on most
rear-wheel-drive vehicles. U-Joints connect two or more
shafts that don't otherwise line up, but intersect at a
point. The typical configuration uses two "U"s' connected
with a "cross".
Car parts cross bearing universal joint
Model |
Size |
Size |
Size |
Size |
Size |
CA10 |
39*118 |
50*155 |
20*55 |
68*89*165.5 |
52*137 |
EQ140 |
39*119 |
39*118 |
20*55 |
62*149 |
50*135 |
CA141 |
39*120 |
39*118 |
20*55 |
48*124.6 |
27*52.5*80 |
EQ153 |
47*140 |
41*118 |
22*59.6 |
48*127 |
27*81.75 |
NJ130 |
35*98 |
39*118 |
20*55.2 |
50*135 |
63.5*152 |
BJ130 |
32*93 |
35*98 |
19*44 |
44*120 |
62*173 |
BJ212 |
30*55 |
35*98 |
24*63 |
62*160 |
60*152 |
T620 |
36*104 |
32*93 |
44*120 |
62*170 |
20*55 |
29*30 |
30*55*88 |
16*38.5 |
45*120 |
20*55 |
|
CKL20CD |
43*136 |
30*55*88 |
24*63 |
70*166 |
20*55 |
WF6700 |
33*93 |
33*93 |
24*63 |
70*178 |
22.5*57 |
TD60A-D |
25*77 |
29*50*76.2 |
24*62 |
24*63 |
15*38 |
SR6480 |
29*47.4 |
29*76.2 |
17*44 |
19*44 |
16*38.5 |
125 |
52*133 |
29*47.4*77.2 |
18*47 |
18*47 |
22*59.6 |
82 |
57*44 |
29*77.2 |
15*38 |
16*43 |
24*63 |
JN162-1 |
50*185 |
47*140 |
22.5*57 |
25*63 |
28*42*72.5 |
BJ130 |
30*88 |
47*140 |
48*124.6 |
25*64 |
30*87 |
SH58- |
27*82 |
43*136 |
48*127 |
30*88 |
52*154 |
210 |
50*150 |
43*136 |
25*63 |
30*54.8*85 |
44*129 |
XJ213 |
27*81.72 |
36*104 |
49*155 |
27*74.6 |
59*167.4 |
U1210 |
27*62 |
48*116.4 |
52*153.85 |
27*80 |
57*172 |
Z34607D |
28*42 |
52*133 |
44*129 |
28*53*80 |
60*170 |
TN141 |
43*136 |
57*144 |
22*55 |
30*78 |
65*170 |
EQ153-1 |
47*140 |
57*152 |
20*45 |
30*80 |
68*165.5 |
LZ111 |
25*63.99 |
44*129 |
20*44 |
57*152 |
59*168 |
CH1018 |
25*63.99 |
42.1*119.5 |
20*50 |
53*135 |
48*126 |
Directions for Use:
1. The bearing should be stored in ventilated, dry, non-corrosive gas, where the relative humility is no more than 60%, for bearing that have been preserved for a long time, they must have rust protection regularly (no more than a year).
2. When installing the bearing, hard tools should not be used to hit directly, the pressure should not pass the rolling element, auxiliary tools with even pressure should be used to install the bearing. If the interference is too high, the bearing should be heated in the mineral oil to 90 to 100 Celsius degrees, then be installed immediately.
3. Clutch release bearing and seal bearing have been filled with grease, so they need no clearing when installing and using. Avoid by no means oil cooking, or other heating.
4. When using the bearing, there should have good lubrication and seal dust-proof device, and check the work state regularly.
5. All the above terms must be paid attention to, otherwise it will affect the bearing precision and service life.
If you need more information about our products,please feel free to contact us.
Your inquiry related to our product & price will be replied within 24 hours.
OEM projects are highly welcomed. We have professional team here to help.
2611 - Feng Shang Wen Chong Center Mansion, No. 198 Minfeng Road, Beitang District