Green sand (wet sand) sand recovery
system can be customized according to foundry
products.
Clay sand is molding sand with clay as
a binder. The sand handling department is an
important part of the foundry. Its main task is to provide qualified
molding sand for the molding core making
department. The preparation of molding sand
directly affects the quality of casting production, the
improvement of output and the reduction of
cost. Due to the complex sand treatment
process, the heavy workload of clay sand treatment and
transportation, and the harsh environment, the mechanization of
sand treatment process is an important part of casting
production.
The company undertakes clay-sand-sand
processing line design, equipment manufacturing, installation and
commissioning, and turnkey projects.
Green sand production line process:
Clay sand is a modeling (core) sand with clay as a
binder. Mechanization of the sand recovery
process is an important part of foundry
production. The quality of foundry sand recovered
after pouring directly affects the production quality and output
of castings, reducing costs. Due to the complicated recycling
process of waste sand, the processing and transportation of green
sand is very heavy, and the environment is very harsh, so the
mechanization of the sand recycling process is an important part
of foundry production. After pouring and cooling, the sand
mold is separated by a vibrating shakeout machine (drum shakeout
machine) to complete the casting sand
separation. Hot castings are transported to the
blasting area by a scale conveyor.
The sand outlet of the shakeout
machine is equipped with a belt conveyor to transport the old
sand to the regeneration area. The suspension magnetic separator
and the belt conveyor are placed crosswise to remove the iron
beans in the old sand. The dust in the old sand is removed
through the dust removal port, the sieved old sand enters the
small sand bin, the old sand is cooled by the boiling cooling
bed, and the 2# bucket elevator vertically lifts the old sand to
the silo where the sand is produced for
storage. The unloading machine distributes the
old sand to the 2# sand bin and the 3# sand bin, and a vibrating
plate feeder is installed at the bottom of the sand
bin. The old sand falls into the belt
conveyor and is transported to the storage hopper of the rotor
sand mixer. The coal powder and bentonite are added to the
auxiliary electronic scale through the screw feeder. After the
proportion is even, they enter the rotor sand mixer for
mixing. After the loose sand machine is
finished, it is sent to the molding machine for a new round of
molding.
Qingdao Sancasting Machine Equipment
Manufacturing Co., Ltd. specializes in the production of green
sand molding line, self-setting sand molding line, foundry
machinery, sand molding machine, sand casting equipment, sand
mixer, GS high-efficiency sand mixer, resin sand mixer,
self-hardening Resin sand mixer, shock molding machine/shock
molding machine, multi-piston molding machine/hydraulic
multi-piston molding machine, sand casting molding machine, sand
recycling equipment, casting molding machine, boxless molding
machine, shot blasting machine, dust collector , Customize the
plan according to the amount of old sand recycling, and provide
sand and gravel recycling equipment installation, commissioning,
and training. Welcome guests to visit our
factory.
1#-2# workshop, production workshop, R&D building, office building and the whole piece of land, No.239 XIXiang Road, Po Li Town, Huangdao District, Qingdao City, Shandong Province