Good quality Smt PCB lead-free desktop automatic wave
soldering machine
--
Board width
|
30-400MM
|
Tin furnace capacity
|
200KG
|
Normal power / total power
|
2-5KW/10KW
|
Starting power
|
7KW
|
Machine size
|
3050*1160*1360
|
net weight
|
400KG
|
Transport motor
|
3Ph 380V 60W
|
Transportation speed
|
200MM-1800MM/Min
|
PCB transportation method
|
From left to right
|
power supply
|
3Ph 380V 50HZ
|
PRODUCT PERFORMANCE
1, Chinese and English man-machine interface, can be
switched at any time
2, Full touch screen plus PLC control, all parameters are
set, saved and recalled in the touch
screen
3, With two temperature measurement interfaces, the
tem-
perature curve can be tested with the temperature
measure-
ment line.
4, Brand controling system like Mitsubishi,
SchneiderOmron etc will warrant the stability of the
machine
5, CE certificated
6, Entrance of machine, It can connect with inserting con
veyor directly
7, Stainless steel long shaft pin chain conveyor, never
abra-
sion
8, Stepper motor for sprayer driving, sider/rail for
sprayer guiding Sprayer moving speed can be setin touch
screen.
9, Moving speed will not be influent by air
pressure.
10, Compare with air cylinder driving, it's moving
quietly, stably, less maintenance, longer
lifetime.
11, Any parts contact with solder they are made of Ti(not
plated TI, not cast iron pot). Just like solder pot
impeller, wave tunnel, wave nozzle, bolts and nuts
etc.
So to grantee the lead free solder's pureness and kep the
pot no eroded.
12, Cavesr apeathat at eftef mexdire
MACHINE COMMENTARY The touch screen and PLC controller
form a complete and stable control system, which can set
and save about 50 sets of parameters on the touch
screen.
Special aluminum alloy guide rail, high hardness and high
strength, no deformation at high temperature and high
load, aluminum with wear-resistant copper strip to ensure
that the titanium claw does not damage during the
friction pro-
cess; The stepping motor drives the spray mechanism to
move on the linear guide rail with precise speed, low
noise, suitable and cumbersome action, and long working
life.
The nozzle is made of Japanese imported products, with
high manufacturing precision and super atomization
effect.
Independent hot air preheating, independent PID
tempera-
ture control, stable and uniform heating, suitable for
batch board; The tin furnace adopts external heating type
heating mode, the temperature control adopts PID mode,
the analog quan-
tity automatically adjusts the voltage phase angle, and
the temperature control precision is connected to
±2℃.
The two-wave furnace of the tin furnace adopts stepless
speed regulation to independently control the peak
height; the two peaks are designed close to each other;
With a small furnace design, the tin furnace capacity
value is
200KG.
Tin furnace electric in and out, manual
lifting.
The tin furnace liner, the nozzle and all the screws in
the tin furnace are made of titanium alloy, which
effectively pre-
vents the corrosion of lead-free solder.
Automatic claw cleaning device, high quality micro water
pump; Powerful fan cooling system.
Factory
TourCompany
strength
Competitive price with good quality,and great after-sales
service Training more than 500 experts and technician for
customers.
Provides professional SMT solutions for the full
line.
Shenzhen Nanyue Panlong Technology Co.,Ltd.Expert in
malking customized high quality SMT LED Pick and Place
Machine,SMT LED Reflow Oven,SMT LED Stencil Printer,SMT
Production Line,LED Assembly Line,SMT LED Machines
Certifications