MOQ | 1 set/sets |
Port | shanghai |
Packaging | plywood package |
Lead Time | 10-15working days |
Function | industrial door |
sectional garage door because of its concise, atmospheric, heat preservation, security and so on many a little bit, a large workshop door to use rapid ascension, and installation of steel flat open before the company, in use after a period of time, but also because of steel flat to open the door of a lot of inconvenience, and have additional purchase industrial upgrade door, after all, the steel door in use after corrosion, switch, etc., painfully rapid ascension is only need to press the switch, within a few seconds to complete the action of opening and closing.This also makes the rapid lifting door has more advantages.
Technical description and advantage description
Panel thermal insulation, energy saving door plate 0.5mm thick
color coated steel plate is selected. After forming the edge of
the front and rear steel plates, they are not in direct contact
with each other, effectively avoiding cold bridge effect and
preventing the door plate from freezing. The heat preservation
and energy saving effect are more prominent.The interior is
filled with high density polyurethane foaming material with
excellent thermal insulation performance (foaming density is
43kg/m3, which is the high density standard of domestic
industrial door market, and the surface is painted.High safety
performance adopt safety design and pass strict test.With
multiple safety features such as torsion spring anti-fracture
device, wire rope built-in, wire rope anti-break device and
bottom protection, it can effectively improve the safety
protection of operators.All safety devices are equipped with
European standard certification and French CSTP laboratory
inspection report.Polyurethane polymer material filling, good
insulation.The sealing strips between the door panels, the sides,
the bottom and the top effectively prevent the leakage of air and
rain water, and the non-contact design of the door panels
effectively prevent the transfer of temperature inside and
outside, low energy consumption, low carbon.Durable, easy to
maintain high strength galvanized hardware connection, torsion
spring galvanized treatment, torsion spring shaft stress
treatment, high strength, reliable, durable.A specially designed
embedded steel plate below the hinge mounting position
strengthens the connection between the hinge and the door
plate.Roller bracket galvanized and wear-resistant nylon roller,
long lasting, simple maintenance.Flexible and varied up to 11
different ways of ascension, suitable for different occasions.The
window of different type can be added on door plank, satisfy the
need of beautiful and daylighting.Optional motor drive for higher
efficiency.Optional color according to RAL standard, serang can
configure any color for you.8 kinds of quasi-color xilang company
has a full automatic color coated steel coil production line,
their own production of color coated steel coil, the use of
national paint, to ensure the color of the door plate color steel
brilliance and lasting.
Technical parameters of door panel
The thickness of the door plate is 40mm,
Double layer 0.5 thickness color coated steel plate,
The intermediate polyurethane was filled with a foaming density
of 43kg/m3.
Sound insulation: 24 dB wind pressure resistance: class 3 (en
13241-1 European standard) (class 11 wind resistance according to
national standard)
Water tightness: 30 Pa safety characteristic torsion spring
balancing device, cycle life 25,000 times, optional high;Torsion
spring anti-fracture device;Wire rope anti-break device.
Seal the door between the panels, the two sides of the door, the
top and the bottom, reduce convection, save energy.
Track and pulley 2mm thick galvanized track, 2mm or 2.5mm thick
galvanized roller bracket, wear-resistant nylon roller.
Hardware hinge, pulley bracket using 2.5mm thick substrate as raw
material, surface galvanized treatment, to ensure the durability
of the product.
Building 1,No. 5001,Baodai West Road,Mudu Town, Wuzhong District