MOQ | 1 piece |
Port | Qingdao |
Packaging | wooden case or others |
Lead Time | 15 days |
Place of origin | Shandong,China(Mainland) | Material | High purity alumina oxide 95%-99% |
Application | Used for all kinds of electric heating equipment and electric equipment, and textile machinery | Brand name | Chaoxin |
Product description:
1.Material : High purity alumina oxide 95%-99%
2.Application: Used for all kinds of electric heating equipment and electric equipment, and textile machinery
3.Diameter from 1mm to 120mm,Length from 100mm to 2000mm,multi bores tubes can be made.
5. Max working temperature 1800.
6. Out surface can be grinded drilling hole to make tight tolerance and right instillation.
7.Large quantity in stock makes fast delivery and competitive prices.
8.OEM and ODM are welcomed
High temperature alumina ceramic roller is a
kind of roller made by ceramic processing. Attention must be paid
to the maintenance of high temperature alumina ceramic roller
when using it.Ideally, it should be cleaned after two
weeks.
Cleaning fluid to choose better clean strength,
at the time of cleaning can use small pieces of cloth or a
sponge, in the high temperature alumina ceramic roller above
polish it slowly, after about ten minutes to use wire brush to
scrub forward by screw, and then wait for it five minutes later
washed with clean water.Use high temperature alumina ceramic
roller to pay attention to its cleaning work, then the service
life of the product will be extended accordingly, reduce the cost
of the enterprise.
Put down the stick dirty roller to polish, but
also must carefully check its straightness and diameter,
convenient to use again.
If the roller bar USES suitable blank formula,
brick bottom coating, and roller surface coating liquid, the
roller body will be less affected by chemical corrosion, and the
situation of broken roller can be effectively
controlled.
The proper use of ceramic roller can give full
play to its maximum utility, and its service life can also be
effectively extended, saving cost and improving enterprise
income.
Features and
Application:
Ceramic roller bar has high strength, good toughness, impact
resistance, good welding performance and corundum porcelain high
hardness, high wear resistance, corrosion resistance, heat
resistance, to overcome the low hardness of steel tube, poor
abrasion resistance and ceramic toughness.Therefore, ceramic
roller bar has good wear resistance, heat resistance, corrosion
resistance and resistance to mechanical impact and thermal
impact, good weldability and other comprehensive properties.It is
an ideal wear-resisting and corrosion-resistant pipeline for
conveying granular materials, grinding and corrosive media.Widely
used in electric power, mining, steel, cement, chemical and other
wear sample industries.
Physical & Chemical Properties of fused silica roller | ||
Content of Al2O3 + Zr2O3 | % | 76-80 |
Density | g/cm³ | 2.5-2.6 |
Water absorption | % | 7~9 |
Bending strength | Mpa | 55-60 |
Coefficient of thermal expansion(25-1000ºC) | x10-6/ºC | 6 |
Max.working temperature | ºC | 1300 |
Thermal shock resistance | Excellent | |
Dimension Tolerance | ||
Warping(Total length:L MM) | mm | ≤0.07% |
Roundness | mm | ≤0.35 |
Outer diameter(O.D.) | mm | ±0.4 |
Factory:
Company
Introduction:
Zibo Chaoxin Ceramics Technology Co., Ltd. as a new and hi-tech
ceramic manufacturer with excellent abilities of technology
research, manufacture and distribution, is located in Zibo
National New and High-tech Industrial Development Zone in
Shandong Province, China.
We mainly produce various kinds of fine ceramic products, which
in material of zirconium oxide (ZrO2), alumina (Al2O3), zirconium
silicate (ZrSiO4), mullite (A3S2) and composite oxide ceramics.
Products include ceramic grinding ball(diameter 0.3mm~30mm),
Ceramic Liner(mud pump spare part), Ceramic Plunger(oil pump
spare part), Alumina Lining Bricks(ceramic ball mill machine),
Wear-Resistant Sleeves, Wear-Resistant Lining Tiles/Mat, ball
mill machine, Cyclone, and chemical ball, etc.
Structural ceramic products are with excellent performances, such
as wearing-resistance, erosion-resistance,
high-temperature-resistance, high-strength, high-hardness in the
working conditions in which metal or polymer ones cannot do. With
functions of the most advanced manufacturing equipment in ceramic
field, our structural ceramic products such as ceramic liner and
ceramic plunger are with better performances(improved by 5 to 10
times), have been used widely in many oilfields and petrochemical
enterprises in the chemical industry.
The company has 3 automatic 1750 degree high temperature tunnel
kiln and shuttle kiln, and equipped with advanced detection
device. The products are widely used in the field of ceramic,
steel, mining, petrifaction, chemical, medical, coal fired power
generation, cement, mineral processing industry, etc.
Most of structural ceramic products from Zibo Chaoxin have
occupied domestic leading level. some have reached international
leading level. Ceramic liner and plunger, in particular, have
been used widely in many domestic oil field and exported to
international market, such as North American market, Middle East
market.
Please
contact us:
International trade sales:Miss Alisa Wang
Tel:+86 18866439370
Zibo National New and High-tech Industrial Development Zone in Shandong Province, China