Shape | Rack Gear | Place of Origin | Tianjin, China |
Model Number | Moudle 2 | Brand Name | TJNBR |
Material | STEEL, Hardened Steel | Processing | forging |
Standard or Nonstandard | Standard | Products name | Gear Rack And Pinion |
Pressure Angle | 20 | Module | From M0.5 to M5 |
Tooth | Straight teeth | Standard | Metric system spur gear rack |
Heat Treatment | Hardening and Tempering | Pinion Hub Config | With key and Set Screws / as the request |
Certificate | ISO9001 | Quality | Support Third party quality testing |
Gear Rack And Pinion
1. Gear Rack Introduction :
The gear rack is a long, straight bar with teeth along its entire length. The teeth have the same pitch as the pinion gear which engages with it.
A gear rack and pinion is a type of linear actuator that comprise a pair of gears which convert rotational motion into linear motion. A circular gear called "the pinion" engages teeth on a linear "gear" bar called "the rack"; rotational motion applied to the pinion causes the rack to move, thereby translating the rotational motion of the pinion into the linear motion of the racks.
We can make all kinds of forging machinery products . Stock Drive Products and Sterling Instrument manufacture long and short-run, high quality precision parts and assemblies. Mechanical components produced and distributed at TJNBR are sprockets, couplings,precision ball bearings, precision gears – ground spur gears, helical gears, miter gears, bevel gears, internal gears, gear rack and pinion . For over five years TJNBR has been supplying precision mechanical parts to a wide variety of aerospace, medical and commercial industries.
2. Gear Rack Application :
The gear rack and pinion arrangement is commonly found in the steering mechanism of cars or other wheeled, steered vehicles. This arrangement provides a lesser mechanical advantage than other mechanisms such as recirculating ball, but much less backlash and greater feedback, or steering "feel".
Often, gear rack is modified to fit specific applications. This may include drilling and tapping mounting holes, cutting to specific lengths or matching ends of two pieces of rack to create a continuous length longer than stock. The machine shop located at our national distribution center in Florence, Kentucky has the knowledge and expertise to rework our stock rack to meet your specifications
3.Gear Rack Process:
Gear Rack Quality Test
Finally I wish you
happy life and well-being!
2-1-203, QingChuan Garden, Northwest Side, Crossing of QingChuan Rd. and YiBin Ave., NanKai Dist.