DIH-W-60
Digital Air-Cooled Electromagnetic
Heater
Features of Electromagnetic Heater:
1)No need for cooling water, no need to
install additional cooling water system, flexible and easy to
use.
2)It can perform induction heating for inaccessible workpieces in an environment where there is no cooling water source in the field.
3)Fully digital embedded control
system.
4)Interactive man-machine
interface.
Technical Parameters:
Product Name |
Full Digital Air-Cooling Electromagnetic Heater |
|||||||
Control Mode |
Digital |
|||||||
Operating Mode |
Manual mode、Automatic mode、temperature control mode |
|||||||
Number of Heating Current Settings |
5-32 Segments |
|||||||
Number of Workpiece Parameters Stored |
10 group |
|||||||
Work Status |
Time、current、frequency、current time curve |
|||||||
Alarm Interface |
Lack of water、over current、over voltage、lack of phase.over current of the drive board,abnormal load、out of control,etc |
|||||||
Model |
DIH-W-55L |
DIH-W-80L |
DIH-W-100L |
DIH-W-200L |
||||
Output Power |
55kw |
80kw |
100kw |
200kw |
||||
Output Frequency |
0.5-10KHz |
|||||||
Input Voltage |
380V士10% |
|||||||
Input Frequency |
50/60Hz |
|||||||
Input Power Factor |
0.93 |
|||||||
Min Circuit Breaker |
3P-125 |
3P-160 |
3P-200 |
3P-400 |
||||
Size |
765*580*900 |
800*600*1300 |
Application of Electromagnetic Heater:
1)Mechanical and Electrical
maintenance industry
Disassembly and installation of large electromechanical
equipment, such as the disassembly and hot assembly of large
workpieces such as bearings, gears, sprockets, counter wheels,
couplings, connecting shafts, balance shafts, roll motor rotors,
etc.;
2)Petrochemical
Industry
Preheating of petroleum pipelines, thermal coating of
pipelines, heating of oil storage tanks, etc.;
Preheating before welding, heat treatment after welding,
hydrogen elimination treatment
Preheating before pipe welding, mold preheating, hydrogen
elimination treatment after pipe welding, post-welding heat
treatment of steel structure, post-welding heat treatment of
boiler main steam pipe.
3)Other Apps
It can be used for heating of steam generators, heating engineering, drying of industrial products, heating of reaction axes, heating of chemical production materials, etc.