Port | Guangzhou china |
Packaging | Vacuum packing, then carton packing, air transport, land transport or water transport, then wooden box packing |
Lead Time | Three days |
Welding head material | titanium alloy |
The equipment for welding mask earbands-ultrasonic spot welding machine specifications:
Model: TN502
Voltage: 220V
Frequency: 28K/35K
Power: 800w
Dimensions: 100cm*52cm*110cm including table
Weight: 20kg with table without table weighs 14KG
Welding head specifications: 8mm 9mm 10mm 12mm
Welding head material: titanium alloy
Parts list: pedal, air pressure regulating valve, manual solenoid valve, aviation socket, chassis, desktop table, etc.
The equipment for welding mask earbands-the use steps of ultrasonic spot welding machine:
1. All the ultrasonic spot welders manufactured by Tengdi Electromechanical Technology have been debugged. After receiving the equipment, you can fine-tune it on the spot and you can use it. If you don't know how to debug, contact the sales staff to send related detailed debugging videos.
2. The operation is very simple, that is, when the pedal is stepped on, the cylinder button automatically pops up to complete a single point, desktop operation, large space, one step and one welding, the operation is as fast as the efficiency.
Equipment for welding mask earbands--Precautions for using ultrasonic spot welding machine:
1. Since the chassis of the ultrasonic spot welding machine is installed at the bottom right of the workbench, during operation, be careful not to touch it, especially the welding time button.
2. Since the cylinder works continuously for 24 hours, the screw button must be tightened, or it will loosen easily.
3. When debugging the welding mask, when debugging the welding time and cylinder stroke, the pedal must be stepped on to the end, otherwise the test is not accurate, so that the welding is easy to be weak or will be melted.
5 / F, lianchangsheng commercial building, Wanjiang District, Dongguan City