colour | black |
-
Water washable, Environment.
- Inks average, good quality.
- Sharper dot, deeper reverse image, and finer halftone image can
be reproducted.
- Excellent printing durability.
- Simple plate-making, exposure time.
10 piece per box
You can eliminate primitive plate-making faults with use of negative film, for example dust entrapment or light scattering.
Sharper dot, deeper reverse image, and finer halftone image can be reproduced with CTP, because of direct exposure to plates.
We offer you Y-type base CTP and W-type base CTP.
The table below shows comparison of each plate types'
characteristics.
Y-type base CTP | W-type base CTP | |
Image Reproducibility | Excellent | Good |
Durability | Good | Excellent |
Washability (Washout Time) | Good | Excellent |
DWF 95 | DWF95D2 | |
Photopolymer Layer | Y-type | W-type |
Total thickness |
0.95 (0.037) |
0.95 (0.037) |
Relief depth |
0.65 (0.026) |
0.65 (0.026) |
Base | Polyester film | Polyester film |
Hardness | Shore D 55° | Shore D 55° |
Wash- out | Water/by Brush | |
Usable Laser | Fiber Lasers,IR Laser/Wavelength=830-1070nm | |
[Image Reproduction] | ||
Screen Range | 1%-98% at 200L/inch | 2-98% at 175L/inch |
Minimum Dot Size | φ100μm(0.004) | φ140μm(0.006) |
Minimum Fine Line | 20μ(0.008)width | |
Reverse image in 300μmwidth | 100μm(0.004) | 125μm(0.005) |
Reverse image in 100μm width | 40μm(0.0016) |
45μm(0.0018) |