This hydraulic press is suitable for cutting and embossing dies and is available in 3 tons and 5 ton capacity.10 ton capacity also available if there is customer requirement.
This is a
hydraulic press suitable for cutting and embossing dies. It is
available in capacity od 3 tons and 5 tons. It can be operated
both manually
and
automatically. It is also suitable for coin embossing operation.
It can be used to cut gold samples in the range of 20 to 35
gauge. It is an upstroke
coining press
with higher ram travel and extra hydraulic cylinder to increase
the production. It is equipped with hyraulic power pack
consisting of piston
pump, electric
control panel board operated directional control valve, relief
valve, pressure gauge, and standard hydraulic accesssories. In
automatic hydraulic dye cutting, first we have to attach the dye
attachement below which we have to attach the dye. After
attaching the dye of given sample which we want to cut, we press
the start switch and then manually bring the dye to the bottom
and make appropriate adjustment so that bottom red light is on.
Then we make similar adjustment for the top end of the dye. After
this we insert the metal strip throught the dye and also pass it
to automatic feeder. Metal strip needs to be cut in strip cutter
machine. Then we put the machine in automatic mode and metal
samples automatically gets cut from the metal strip according to
the type of design of the dye. So, this is the mechanism of how
the automatic hydraulic dye cutting press works.
Shop No.18 Silver Market Nr.Kotharia Naka Hathikhana Main Road Rajkot (Guj) India