TAITIAN manufactures and markets complete production lines
for SMC composite production industry.
TAITIAN is expert in forming technology and offers good
quality SMC materials, SMC dies, SMC moulding presses and
mould heating system. TAITIAN warmly welcome customer's
visit for inspection of trial production carried out in the
factory before delivery.
Characteristics:
1) The press is available up to 6000 Tons capacity as per
customers' requirements. Each press is subjected to
rigorous simulation through FEA (Finite Element Analysis)
design testing before manufacturing. Stress testing
software for structural rigidity is utilized to ensure each
press to meet demanding standards. High capacity press is
preferred in H Frame structure.
2) Advanced and systemized Taiwan hydraulic system, Taiwan
TWOWAY integrated cartridge valve oil circuit allow little
fault, low noise level, minor reversing impact but high
reliability.
3) Eight sides of brass guide rails of full stroke length
not only ensure high accuracy but also allow easy
adjustment of slide leveling.
4) The press is well equipped with safety devices as per CE
standards, like two sides locking device and CE Mark light
curtain protection sensors. Mitsubishi PLC and 7 / 10 inch
Taiwan Weinview touch screen make the machine easy for
operation and specification adjustable.
5) Compression molding press is equipped with advanced
technique of adjustable air breathing system. The slow
opening after the curing point helps in avoiding jerk
movement.
6) The press is featured by slow decompression to eliminate
hydraulic shock, RAM pre-fill system with side cylinders
for fast closing speed and proportional valving for
controlling closing speed and compression rate.
7) Each press is manufactured under strict quality control
management with good quality components from France, Japan,
Germany, USA and Taiwan to assure the best performance and
accuracy.
8) Each press is equipped with a Die Change Trolley for
easy die change with lower cost than moving
bolster.
Optional:
1) Touch Screen Display (HMI)
2) Heating available by Electric Heaters / Heat Transfer
Oil / Steam
3) Trolley / Moving Bolster for easy die change
4) Cushion Device for anti-shock while stamping
5) Water Cooler / Oil Chiller
6) Mould Stripping Device
7) Air breathing design as per request
8) Accumulators for fast speed and low energy
consumption
Applications:
Compression moulding press is specially designed for
composite production industry, like moulding of
SMC/BMC/DMC/FRP.
Different applications of the press include the following:
SMC sanitary wares, SMC electric box, satellite dish,
biogas digester, SMC auto parts and more.
Product
details:
Make of
accessories:
MAKE of Major Accessories
|
No.
|
Item
|
Standard MAKE
|
High Standard MAKE
|
1
|
PLC
|
Mitsubishi
|
Siemens
|
2
|
Motor
|
WanNan/China top brand
|
Siemens / Rexroth
|
3
|
Pump
|
Anson/Taiwan, Yuken/Japan
|
Siemens / Rexroth
|
4
|
Servo Pump
|
DAIKIN/Japan
|
DAIKIN/Japan
|
5
|
Solenoid Valve
|
Yuken/Japan
|
Atos/Italy, Rexroth
|
6
|
Directional Valve
|
Yuken/Japan
|
Atos/Italy, Rexroth
|
7
|
Proportional Valve
|
Yuken/Japan
|
Atos/Italy, Rexroth
|
8
|
Cartridge Valve
|
Jeou Gang/Taiwan,SUN/USA
|
SUN, Atos, Rexroth
|
9
|
Prefill Valve
|
TAI COLN/Taiwan
|
Atos/Italy, Rexroth
|
10
|
Electric Units
|
Schneider/France
|
Schneider/France
|
11
|
Light Curtain
|
LNTECH with CE Mark
|
LNTECH with CE Mark
|
12
|
Touch Screen
|
Weinview/Taiwan
|
Siemens
|
13
|
Pressure Gauge
|
SKON/Taiwan
|
SKON/Taiwan
|
14
|
Hydraulic Manifold
|
MADE IN TAIWAN
|
MADE IN TAIWAN
|
No worse quality components are adopted in TAITIAN
presses.
|
Our factory:
Customer visit: